Contact Platform Support
Help Center(N-TYPE)MADE IN TAIWAN ACRYLIC PAINT FOR METALLIC BLUE CAR PAINT
Related Products
-
(N-TYPE) ABRASION RESISTANT COATING RAL 3003 FOR PUNCH MACHINEUS$ 24.33 - 38.33MOQ: 5 Sets -
(N-TYPE) MADE IN TAIWAN RAL 9003 ACRYLIC POLYMER ANTI UV PAINTUS$ 24.33 - 38.33MOQ: 360 Sets
-
(SOLVENT-LESS) EPOXY COATING MATERIAL ANTI SCRATCH COATING TAIL PAINTUS$ 90 - 146.67MOQ: 120 Sets
-
MADE IN TAIWAN SPECIAL LUMINOUS PAINT GLOW IN THE DARK PAINTUS$ 50 - 62.5MOQ: 2 Units
-
MADE IN TAIWAN LUMINOUS SPRAY PAINT GLOW IN THE DARK FABRIC PAINTUS$ 50 - 62.5MOQ: 2 Units
(N-TYPE)MADE IN TAIWAN ACRYLIC PAINT FOR METALLIC BLUE CAR PAINT
POLYURETHANE COATING(N-TYPE) | |
TYPE |
A two-pack, polyurethane finish enamel based on Acrylic Polyol, resins and non-yellowing Isocyanate Hardener with weather resistant pigments. |
USES |
Top coat for vehicles, bridges, boot top, topside steel structures, and wooden and metal products, etc. |
CHARACTERISTICS |
1. High gloss with excellent appearance. 2. Excellent resistance to weathering with gloss retention. 3. Excellent resistance to oils, acids, alkalis and solvents. 4. Excellent hardness, adhesion and abrasion resistance. |
GLOSS |
Above 90% |
COLOR |
Desired colors |
WEIGHT |
Above 1.0 kg/L (Mixer) |
VISCOSITY (25 °C) |
60– 85 KU (Mixer)(25 °C) |
DRYING TIME (25 °C) |
Set-to-touch 1 hr. Dry hard 6 hrs. (25 °C). |
OPTIMUM FILM THICKNESS |
Wet 95μ(microns)Dry 30μ(microns) |
MIXER RATIO |
Base: Hardener = 2: 1 (by volume.) |
NON-VOLATILE CONTENT |
Above 55% |
POT LIFE |
4 hrs. (Mixture , 25 °C) |
THINNER |
PU Thinner |
THINNING RATE |
10~25 % |
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
APPLICATION METHOD |
Spray, Brush. |
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Avoid applying the paint in rain or humid weather, particularly, a wet surface must be thoroughly dried. 3. All equipments must be cleaned immediately after use. 4. When used inside tanks, sufficient ventilation must be provided. 5. When overcoating interval is exceeded, paint surface must be roughened to insure adhesion. 6. Hardener can must be tightly closed to avoid reaction with moisture in air toform bubbles and gelation. 7. Strictly controlling application, not be exceed 60μ pre coat, to avoid bubbles for mation. |
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Neon Colors Polyester Powder Paint Electrostatic Powder CoatingUS$ 1 - 9MOQ: 1 Kilogram
-
Thermoplastic Polyethylene LDPE Powder Paint Coating for Refrigerator Grid and Highway FenceUS$ 2 - 5MOQ: 1000 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
Glass Car Body Coating From JapanUS$ 150,000 - 150,000MOQ: 1 Carton
