WATER BASED INTERIOR WALL PAINT COATING

FLAT EMULSION PAINTS

TYPE

The matt emulsion paint based on excellent water resistant, alkali resistant water-based resin with hiding pigment and additives.

USES

Used for indoor cement, brick, gypsum structure to decoration and protection such as bedroom.

CHARACTERISTICS

1. Use water as the solvent without pollution and fire danger.

2. Use water as a dilution to be able to reduce the construction

cost. 

3. Excellent resistance to water and alkalis.

APPLICATION METHOD

Spray, Brush, Roller.

COLOR

White or light colors  

Gloss

Flat

SPECIFIC GRAVITY

Above 1.3 Kg/L , depending on colors (Mixture)

VISCOSITY (25℃)

80~110 KU  

DRYING TIME (25℃)

Set-to-touch

Dry hard

1/2 hrs.

2 hrs.

OVERCOATING INTERVALS

(25℃)

Min.

3 hrs. 

OPTIMUM FILM THICKNESS

Wet

Dry

90 microns  

35 microns

VOLUME SOLIDS

Above 50%(Mixture)

THEORETICAL COVERAGE

40 m2/Gal 11 m2/L 8.5 m2/Kg

THINNER

Water  

THINNING RATE

10~20%

STORAGE SHELF LIFE

Minimum 2 years under normal storage conditions.

POT LIFE

-

NOTE

1. Before application, stir paint thoroughly, and when paint is too thick, the tap water

    within specified quantity can be added.

2. Adhered moisture, grease, and dirt on substrate must be cleaned thoroughly.

3. The application must be waited for 2 to 3 weeks until the walls were completely

    dry off, because the new constructed cement walls contain a lot of moisture and

    free alkaline substances that may reduce paint film performance and adhesion.