Contact Platform Support
Help CenterEPOXY PRIMER PAINT FOR STAINLESS STEEL COATING PAINT
Related Products
-
EPOXY PRIMER PAINT SPRAY PAINT PRICEUS$ 14 - 25.31MOQ: 1 Set -
MADE IN TAIWAN EPOXY SPRAY PAINT PRICEUS$ 13 - 15MOQ: 1 Set
-
ANTI RUST PAINT MANUFACTURER PAINT BRAND NAMESUS$ 50 - 55MOQ: 150 Barrels
-
EPOXY PAINT PRODUCTS SPRAT SUIT NON TOXIC SPRAY PAINT FOR METALUS$ 13 - 25.31MOQ: 1 Set
-
IRON OXIDE RED PIGMENT METALLIC ANTIRUST SPRAY RUST EFFECT PAINTUS$ 50 - 55MOQ: 2 Barrels
EPOXY PRIMER PAINT FOR STAINLESS STEEL COATING PAINT
EPOXY ZINC PHOSPHATE PRIMER | |
TYPE |
A two-pack, special alloy primer based on epoxy resin, hardener and special zinc phosphate pigments. |
USES |
Uses for galvanized steel, aluminum, alum-alloy metal and stainless steel. |
CHARACTERISTICS |
1. Tough film, good tensile strength and adhesion. 2. Excellent resistance to fresh and sea water. 3. Excellent resistance to chemical, solvent and oil. 4. Very fast drying and excellent adhesion. 5. Very good adhesion with galvanized steel, aluminum, alum-alloy metal and stainless steel. 6. Very good resistance for abrasion. 7. Excellent anti-rust function. |
COLOR |
Gray,Red,White |
GLOSS |
Flat |
WEIGHT |
Above 1.1kg./L (Mixture) |
VISCOSITY (25℃ ) |
70 - 90 KU (Mixture) |
DRYING TIME (25 ℃ ) |
Set-to-touch 2Hrs. Dry hard 17 Hrs. Fully cured 3 days. |
OPTIMUM FILM THICKNESS |
Wet 100μ(microns) Dry 40μ(microns) |
MIXING RATIO |
Base : Hardener = 5 : 1(by wt.) |
POT LIFE (25℃ ) |
8 Hrs. (Mixture) |
NON-VOLATILE CONTENT |
Above 70%(Mixture) |
THINNER |
Epoxy Thinner |
THINNING RATE |
5~10% |
APPLICATION METHOD |
Spray, Brush, Roller. |
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
NOTE |
1.Mix base and hardener according to mixing ratio and stir thoroughly; allowing the induced time for 10~20 minutes before application. 2.Adhered moisture, grease, dirt, rust and corrosive salts on substrate must be cleaned thoroughly 3.Avoid applying the paint in rainy or humid weather,avoid applying the paint in rainy weather or humidity above 85% RH, particularly, a wet surface must be thoroughly dried. 4. All equipment must be cleaned immediately after use. 5. When used inside tanks, sufficient ventilation must be provided. |
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Thermoplastic Powder CoatingUS$ 1 - 9MOQ: 1 Kilogram
-
Thermoplastic Polyethylene LDPE Powder Paint Coating for Refrigerator Grid and Highway FenceUS$ 2 - 5MOQ: 1000 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
Glass Car Body Coating From JapanUS$ 150,000 - 150,000MOQ: 1 Carton
