Contact Platform Support
Help CenterMADE IN TAIWAN NON TOXIC LACQUER PAINT PRIMER INDUSTRIAL PRIMER PAINT FOR METAL
Related Products
-
(N-TYPE) MADE IN TAIWAN PAINT TINTS COATING MANUFACTURES METALLIC WHITE PAINTUS$ 24.33 - 38.33MOQ: 5 Sets -
(N-TYPE) MADE IN TAIWAN METALLIC SPRAY PAINT PRODUCERS MAGIC SPRAYUS$ 24.33 - 38.33MOQ: 5 Sets
-
(N-TYPE)MADE IN TAIWAN PAINT TINTER RAL 9005 BLACK ANTI UV PAINTUS$ 24.12 - 36.67MOQ: 360 Sets
-
MADE IN TAIWAN UNDERCOATING SPRAY RAL 7035 LIGHT GRAY ANTI-RUST EPOXY PAINTUS$ 10.67 - 20.67MOQ: 1 Set
-
(SOLVENT TYPE) EP COATING WITH PAINT SOLVENT INDUSTRIAL FLOOR PAINTUS$ 17.2 - 22.45MOQ: 1 Unit
MADE IN TAIWAN NON TOXIC LACQUER PAINT PRIMER INDUSTRIAL PRIMER PAINT FOR METAL
Epoxy Primer | |
TYPE |
A two-pack, special alloy primer based on epoxy resin, hardener and special pigments |
USES |
Excellent adhesion and antirust for galvanized steel, aluminum, and stainless steel. |
CHARACTERISTICS |
1. Tough film, good tensile strength and adhesion. 2. Excellent resistance to fresh and sea water. 3. Excellent resistance to chemical, solvent and oil. 4. Very fast drying and excellent adhesion. 5. Very good adhesion with galvanized steel, aluminum, alum-alloy metal and stainless steel. 6. Very good resistance for abrasion 1 |
COLOR |
Gray,Red,White |
GLOSS |
Flat |
HIDING POWER |
Above 5m² |
WEIGHT |
Above 1.1kg./L (Mixture) |
VISCOSITY (25 °c) |
70 - 90 KU (Mixture) |
DRYING TIME (25 °c) |
Set-to-touch 2Hrs. Dry hard 17 Hrs. Fully cured 3 days. |
OPTIMUM FILM THICKNESS |
Wet 100μ(microns) Dry 40μ(microns) |
THEORETICAL COVERAGE |
34.0m²/Gal 10.0m²/L 7.7m²/kg. |
MIXING RATIO |
Base : Hardener = 5 : 1(by wt.) |
POT LIFE (25°c) |
8 Hrs. (Mixture) |
NON-VOLATILE CONTENT |
Above 70%(Mixture) |
THINNER |
Epoxy Thinner |
THINNING RATE |
5~10% |
APPLICATION METHOD |
Spray, Brush, Roller. |
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
NOTE |
1. Mix base and hardener according to mixing ratio and stir thoroughly; allowing the induced time for 10~20 minutes before application. 2. Adhered moisture, grease, dirt, rust and corrosive salts on substrate must be cleaned thoroughly 3. Avoid applying the paint in rainy weather or humidity above 85% RH, particularly, a wet surface must be thoroughly dried. 4. All equipment must be cleaned immediately after use. 5. When used inside tanks, sufficient ventilation must be provided. |
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Polyethylene LDPE Powder Coating for Automotive Parts With UV StabilityUS$ 2 - 5MOQ: 1000 Kilograms
-
Building CoatingNegotiableMOQ: 2700 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
Glass Car Body Coating From JapanUS$ 150,000 - 150,000MOQ: 1 Carton
