Contact Platform Support
Help Center(N-TYPE) MADE IN TAIWAN HIGH GLOSS FINISH CLEAR VARNISH PAINT
Related Products
-
(N-TYPE) MADE IN TAIWAN GLOSS PAINT CLEAR COAT 2K VARNISH PAINTUS$ 20.54 - 25.6MOQ: 3 Sets -
(N-TYPE) MADE IN TAIWAN INDUSTRIAL VARNISH LACQUER COATING CAR CLEAR COATUS$ 20.54 - 25.6MOQ: 3 Sets
-
(N-TYPE) MADE IN TAIWAN HIGH GLOSS FINISH CLEAR PAINT CLEAR VARNISHUS$ 20.54 - 25.6MOQ: 3 Sets
-
(N-TYPE) MADE IN TAIWAN FOOD GRADE RESIN PAINT AND COATING INDUSTRY CLEARCOATUS$ 20.54 - 25.6MOQ: 3 Sets
-
(N-TYPE) MADE IN TAIWAN GLOSSY CLEAR LACQUER COATUS$ 20.54 - 25.6MOQ: 3 Sets
(N-TYPE) MADE IN TAIWAN HIGH GLOSS FINISH CLEAR VARNISH PAINT
POLYURETHANE CLEAR COATING (N-TYPE) | |
TYPE |
A two-pack, non-yellowing clear paint based on acrylic resin, polyol resin polymer and polyisocyanate hardener. |
USES |
Clear topcoat for metalware and woodenware such as furniture, musical instruments, handicrafts, sports equipment etc. |
CHARACTERISTICS |
1. High gloss and hardness, good gloss and color retention. 2. Excellent adhesion for wooden and metal wares. 3. Excellent abrasive and heat resistance. |
GLOSS |
Above 90% |
APPEARANCE |
Clear liquid |
WEIGHT |
Above 1.0 kg/L (Mixer) |
VISCOSITY (25 ℃) |
55~80 KU ( mixture, 25℃ ) |
OPTIMUM FILM THICKNESS |
Wet 50 microns Dry 25 microns |
MIXER RATIO |
Base : hardener = 2 : 1 (by volume) |
DRYING TIME (25 ℃) |
Set-to-touch 2 hr. Dry hard 8 hrs. (25 ℃). |
NON-VOLATILE CONTENT |
Above 50% ( mixture ) |
POT LIFE |
4 hrs. ( mixture, 25℃ ) |
THINNER |
PU thinner |
THINNING RATE |
5~20 % |
STORAGE SHELF LIFE |
Minimum 1 year under normal storage conditions. |
APPLICATION METHOD |
Spray, Brush |
NOTE |
1. Mix base and hardener according to the mixing ratio and stir thoroughly. 2. Adhered moisture, grease, and dirt on substrate must be cleaned thoroughly. 3. Use specified thinner to avoid formation of bubbles and pinholes. 4. The lid of hardener barrel must be tightly closed to prevent the contact with moisture in the air to avoid generating bubbles and gel. 5. The mixture must be available within the pot life. 6. The sprayed thickness of paint film exceeded 50microns per coat that is easy to generate bubbles. It must be done effective control when applied. 7. All equipment must be thoroughly cleaned immediately after use to avoid gel. 8. The brushing type can also be applied by roller, but to roll the polyurethane or fluorocarbon paints, the film thickness is easy too thick to generate small bubbles. It shall pay special attention to. |
Send Inquiry to This Supplier
You May Also Like
-
Anti-static Self-leveling Epoxy Floor CoatingNegotiableMOQ: 1
-
Ral Color Electrostatic Powder Spray Coating on Metal SurfaceUS$ 1 - 9MOQ: 1 Kilogram
-
PVC Coating Powder for Security Wire Mesh Fence - Enhanced DurabilityUS$ 2 - 5MOQ: 1000 Kilograms
-
Titanium Dioxide Rutile Type 93% Used for Paint STD001 Shijiazhuang Standard ChemicalsUS$ 100 - 2000MOQ: 1 Ton
-
Aliphatic Polyurethane Paint for BuildingUS$ 1.8 - 8MOQ: 1000 Kilograms
-
Rotary Water Spray RoomNegotiableMOQ: 1 Set
-
EASY PAINTNegotiableMOQ: 2000 Pieces
-
Rubber Paint on SaleUS$ 1.45 - 35.21MOQ: 100 Pieces
-
Powder Coating EquipmentUS$ 75,000 - 950,000MOQ: 1 Set
-
Glass Car Body Coating From JapanUS$ 150,000 - 150,000MOQ: 1 Carton
