long span color coated corrugated roofing sheet for sheds

Model No.:YX25-205-820 /YX25-210-840/YX15-225-900
Thickness:0.15-0.8mm,Tolerance±0.02mm
Wave Height:25mm/15mm
Wave width:205mm/210mm/225mm
a=Coverage Width:820mm,840mm,900mm
b= Coil Width:1000mm

c= availability;82%,84%.90%
Length:Any length,generally less than5.6m or 11.8m,Tolerance±0.2mm
Color:standard color:red,blue,white grey,etc
special color:according to RAL color
Wave No. :5
Surface finished:50-150g/m2 Zinc-coating( as per your request)

Painting:Top painting:16~25μm

Back painting: 6~10μm

Feature:Building metallic materials have excellent performance of decoration, corrosion resistance etc.

rupture strength:280-400 Mpa

Tensile strength::300-400 Mpa

The elongation is not less than 20

Metal sheet is a square fluted profile with an effective covering width of 820,840,900mm designed for use as side

cladding or roofing material in commercial, industrial and residential buildings. The name IBR is abbreviated from

"Inverted Box Rib" and has became a household name in the foreign market

The deep broad flute design offers excellent drainage characteristics combined with optimum weight versus load/span

capabilities.

Structural guidelines.

IBR roof sheets are available in a wide range of materials displaying various structural properties. It should be noted

that the load span characteristics are only to be used as a broad guideline as purlin spacing is also dependant on other

factors such as the prevailing winds in a certain area, snow during winter periods, the presence of dust and other particles

in industrial areas, the type of structure that is being erected etc.. We therefore recommend that an engineer is consulted

to determine the purlin spacing for a specific application.

Available dimensions

IBR sheeting is available in standard lengths up to 15 metres. The permissible length tolerance for the standard length

range will be -+5 mm. Sheets outside these parameters are available on request and might be subject to special pricing

arrangements. The maximum height which can be transported is 4.3 metres. This factor should be taken into account

when bullnoses and curves are designed.

Roof pitch

When using IBR, the recommended minimum pitch for roof slopes in excess of 30 m is 7.5º and for slopes less than

30 m is 5º. When IBR roof sheets are end lapped the roof pitch should be taken into account. The minimum end laps

for roofs pitches in excess of 15º is 150 mm and for other roofs a minimum of 250 mm is recommended. End laps for

side sheeting should be at least 100 mm. It is recommended that end and side laps on low pitch roofs are sealed to ensure

watertightness. 

 Applications
(1) Gymnasium
(2) Warehouse
(3) Hospital
(4) Supermarket
(5) Shelter
(6) Commercial facilities
(7) Industrial facilities
(8) Garage

 All kinds of type as your request!!!!!!!!!!

Packing :

accessory

Although we are one-year Alibaba member. But we have 14-year experience in building material and masonry material in domestic market.

trust us and we will give u a better future. Many soho through our company to export we open the foreign trade. foreign customer often

Visit our product. we would try our best to help u. best quality and service to u. Recently, we open the trade assurance, If u don't satisify

my product ,back it.