3.15mm Hot Dipped Galvanized Iron Wire for Armouring Cable

Specifications

3.15 mm Hot Dipped Galvanized Iron Wire for Armouring Cable

Technical Armouring Wire is a soft, heavily Zinc coated wire used in the power, terrestrial and marine communications industry for binding electrical cables which are used in places where the cable maybe subjected to crushing or other injury. 

Low carbon armouring wires are produced to meet the requirements of Australian Standard AS 3863 "Galvanised Mild Steel for Armouring Cables"; BS EN 10244 etc. High carbon armouring wires can be produced to customer requirements on request. 

Armouring wire is available in diameters ranging from 0.9mm to 8.0mm and is available in either coils or stems.

Armouring Wire Specifications

Diameter Tolerances

Galvanised Coating Weight - AS3863; EN 10244

Tensile Strength (MPa)

The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range for Armouring Wire is 340 to 500 MPa.

Steel Chemistry

The table below is indicative of steel chemistries used for low carbon Armouring Wire.

Quality Control & manage system

Entire producing process is supervised from raw material to installment on field site.

Qualified Inspector tests each processing as per relative standard and Testing Certificate

Products management system

Save your time and get all relative products in one stop

Feature products  

1) Galvanized iron wire with zinc coating 500g/m2

2) Maxiumu Diameter of the wire: 8mm

Photos of Factory