Solder Paste Liquid Controller Dropper Fluid glue dispenser

Specifications

B-A6 Glue Dispenser
1. Uses air pressure within set time to push out liquid
2.Using timer to control each dripping time

 B-A6 Adhesive Glue Dispenser with High Quality
1. Uses air pressure within set time to push out liquid
2.Using timer to control each dripping times

Performance

1. If the air pressure and time are well adjusted and the nozzles are properly chosen,

 

2. It can easily change each dripping volume. It has extensive uses, and applicable liquids include non-drying adhesive, red glue, yellow glue, epoxy resin, silica gel, lubricants, screw-tightening glue, anti-soldering solvent or tin paste and so on.

 

3. The full set of products is available, provided with straight-type steel pipe nozzle and sharp-type plastic needle nozzle to make full use of the machine functions.

 

 

Specification

 

 

Model	B-A6
Auto Set Time	For 0.01 ~ 30 Sec.
Timing	Artificial sustained pedal (line painting) or Single-touch plastic tap
Minimum Note Volume Drops	0.01 ml.
Repeat Accuracy	0.5%
Input Barometric Pressure	0.25 ~ 7 bar (35 ~ 100 psi)
Input Barometric Pressure	0.1 ~ 5.5 bar (1 ~ 78  psi)
Input Voltage	220V or  110V (can select at back side)
Dimension  / Weight	235 mm x 225 mm x 633 mm / 2.2 kg.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Our dispensing controller is applied in many ways.

 

1.Material for dispensing

 

Such as solder paste, UV adhesive, lubricant, epoxy resin, fast cure adhesive, silicone resin, etc,

 

2.Ahering, fixing, dot coating, line coating, etc.

 

 

 

 

 

Foot Switch, Finger Switch,Tube and glue needle

 

 

We are sure the high quality and competitve price as always.

 

 

 

We’ll try our best for you!

 

 

 

Please don't hesitate to contact our sales for more info.

 

 

 

Contact:Lucy

Tel:86-755-83045048/83645461
Mobile:86(0)135 5476 2325

Skype:
http://kingsom.en.china.cn 

 

 

 

Your Visit are Highly Welcomed.