Ph Value Tester Tes-1380k Tester Tes1380k ph Meter
Ph value tester tes-1380k tester tes1380k ph meter
Specifications
PH tester for water
1.Automatic / manual temperature compensation
2.Fast response and high accuracy
3.Large LCD dual display
TES - 1380K Laboratory pH tester for water (pH value) /water detectorIntroduction
1.TES1380K can be used for treatment of dyes, lotions, chemical, brewing, bacteriology, sewage, paper pulp, pharmaceutical, fermentation, plating, beverage, aquaculture, etc..
2.Simultaneous display of pH and temperature or voltage and temperature values
3.Attached to the RS-232 computer interface (bidirectional) and software
4.Auto / Manual pH and temperature correction
5.Automatic / manual temperature compensation
6.Fast response and high accuracy
7.Complete pH meter function
8.A single record: 99 sets of data (directly from the LCD
9.Recorded and read out from the computer to record data)
10.Continuous record: 99 sets of data can be recorded up to
11.3,000 document (s) (with calendar)
TES-1380K pH tester for water(pH value) /water detector
Features:
Circuit |
Single-chip microcomputer circuit |
Show |
Large LCD display 76.5mm * 50.5mm * 2.7mm |
Measuring range |
pH: 0 to 14 pHmV: 0 to 1999mV Temperature: 0 to 100 ° C, 32 to 200 ° F |
Input impedance |
About 1012 ohm |
Temperature compensation correction |
Manual correction: automatic correction from 0 to 100 ° C: 0 to 100 ° C |
pH calibration correction |
pH 4 and pH 7, two o'clock scale |
Data lock |
Automatically lock data when the reading stabilizes |
Data record |
A single record count: 99 sets of consecutive records in: 99 groups, the largest 3,000 / |
Automatic shutdown |
Off automatically after 10 minutes |
Overload Indication |
Instructions "--------" |
pH electrode connectors and temperature connector |
pH electrode connection BNC connectors, temperature, connect the headset connector |
Operating temperature |
0 ° C to 50 ° C (32 ° F to 122 ° F) |
Operating Humidity |
Below 80% RH |
Sampling rate |
About 1.5 seconds |
Power supply |
S-006P 9V 6F22 a |
Battery Life |
About 50 hours |
Attachment |
Box, carrying case, manual, battery, software, 9 foot switch to 25-pin converter, RS-232 converter |
Accessories (optional) |
pH4 and pH7 standard buffer, pH electrode, temperature bars |
TES-1380K pH tester for water(pH value)/ water detector
Electrical Specifications:
Measurement |
Range |
Resolution |
Accuracy |
pH |
0.001 to 14pH |
0.001pH |
+/- 0.002pH |
mV |
0 to 2000mV |
0.1mV |
+/- 0.2mV |
Temp (°C) |
0 to 100°C |
0.1°C |
0.5°C |
Send Inquiry to This Supplier
You May Also Like
-
Industrial pH Meter for Wastewater Treatment With IP65 Waterproof DesignNegotiableMOQ: 1 Set
-
PHS-8B Online Auto PH AnalyzerUS$ 258 - 550MOQ: 1 Set
-
New PH-009 IA Pen Type Digital pH Meter Digital Tester Hydro Soil PH Meter Blood PH MeterUS$ 1 - 100MOQ: 100 Pieces
-
Digital PH MeterNegotiableMOQ: 100 Pieces
-
Adhesive Water Checker / Moisture Detection / Single UseUS$ 10 - 20MOQ: 40 Cases
-
Digital Soil ph MetersUS$ 30 - 80MOQ: 5 Pieces
-
SELON510 LAB DIGITAL PH METERSUS$ 565 - 619MOQ: 1 Piece
-
PHS-3D Bench Top Ph MeterNegotiableMOQ: 50 Pieces
-
3 In1 Plant Flowers Soil PH Tester Moisture Light Meter Hydroponics Analyzer NewNegotiableMOQ: 500 Pieces
-
Automatic Electronic PH&ORP Swiming Pool Water Chemical Level ControllerUS$ 450.00 - 500.00MOQ: 1 Set









