2016 FD One Step Plastic Vaccine Bottle Injection Molding & Blowing Machine

»Product features of 2016 FD one step plastic vaccine bottle injection molding & blowing machine

1.excellent machinical strength. impact-resting,and non-cracking.

2.Bottle mouth and screw thread are of precise measurement, enable 100%

close matching with the bottle cap.

3.The weight of the product can be pre-setted.

4.The measurement and thickness of the product can meet the requirement of

design without any deviation.

5.The surface of bottle mouth and body is bright and smoonthness.

6.No defleshing and trimming save the material cost.

7.There is no joint seam at the bottom, and strength is improved accordingly.

8. The joint seam on the bottle body is smooth. 

»2016 FD one step plastic vaccine bottle injection molding & blowing machine application field

»Main Features of 2016 FD one step plastic vaccine bottle injection molding & blowing machine

1.The clamping framework adopts single-crossbeam,double pillars,which enlarges the space of setting mould,will be easier to install mould.

2.Injection clamping adopts the structure of three oil vats and small supply-oil case,hence the speed of open/clamping will be quicker and the bearing pressure of mould will be more equally.

3.using tie-bar protection makes open/clamping mould work while transfer table rise/fall,so the production efficiency improve obviously,and protect core rods damages once mold hasn't at right station.

4.servo motor system control for 30% consumption saving (Optional).

5.Special thickness working platform with QT material assure machine run stably,clamping well,anti-distortion.

»Main Technical Parameters of 2016 FD one step plastic vaccine bottle injection molding & blowing machine

»Reference cavity numbers on each model 2016 FD one step plastic vaccine bottle injection molding & blowing machine

2016 FD one step plastic vaccine bottle injection molding & blowing machine Assisstant equipment

» 2016 FD one step plastic vaccine bottle injection molding & blowing machine Main Parts Brand

machine packed with film and  wooden pallet

mold packed by sea worthy wooden cases.