Contact Platform Support
Help CenterPET Laminating Pounch Film ,thickness 12mirco-300mirco
Related Products
-
Transparent PET Thermal Lamination Pre-coated EVA FilmUS$ 2.9 - 3.8MOQ: 5 Tons -
PET+EVA A3/A4/A5 Transparent Hot Laminating Pouch Film 80mic/100micUS$ 2.59 - 3.16MOQ: 2 Tons
-
Glossy 80mic PET Laminator Pouch Thermal Pouch Laminating FilmUS$ 2.59 - 3.16MOQ: 2 Tons
-
PET+EVA Thermal Laminating FilmUS$ 2.79 - 2.99MOQ: 1 Ton
-
PET +EVA Laminating Film RollUS$ 2.59 - 3.16MOQ: 2 Tons
PET laminating pounch film ,thickness 12mirco-300mirco
Process Parameter
Equipment for laminating film: Dry and wet laminator machine.
Temperature: Normal: 85~100centigrade; Special: 100~110centigrade
Roller pressure: Normal: 8~15Mpa; Special: 16~25 Mpa
Speed: Normal: 5~30 M/min; Special: 5-10 M/min
Remarks: Special laminations refer to those with thick ink, dark color, much moisture and large size paper.
Primary Competitive Advantages
Form A,Packaging,Green Product,Price,Service,International Approvals,Small Orders Accepted,Experienced Staff,Prompt Delivery
Environmentally friendly: It is environmentally friendly, non-hazardous to health and safe to use as no toxic gases or volatile content is emitted.Safety in laminating process as no solvent based adhesive is used.
High function: Compared with other solvent lamination, our film is better in clarity and bonding. Strong ability of absorbing powder.It prevents lamination from being pressed, bubbled and shredded off easily. Matt thermal lamination film is good for spot UV and hot stamping.
Easy handling: It is easy to operate once the required temperature is met and no special technique required.
Efficient and energy-saving: Production cost is reduced substantially as there is no film wastage, mixture of adhesive solvent, and no UV heating lamp is required.
Adaptable to different kinds of machines: This film is recommended to be used in dry laminator. Small adjustments need to be made to the machine if the film is used in wet laminator.
Application manual:
1. Adjust roller pressure and temperature according todifferent types of paper and ink.
2. When using the film for the first time or changing to other sizes,we recommend a small trial volume before going into fully mass lamination.
3. The following situation will affect the quality of the film during lamination.
a.When using metal ink
b.When the ink contains too much wax, dried oil, adhesive, and silicon additive. etc.
c. When the ink is too thick.
d.When the ink is not completely dry
e.When the paper contains too much moisture
f.When there is too much powder
Peng sheng Your Best Choice!!!
welcome yopu kind inquiry
Send Inquiry to This Supplier
You May Also Like
-
Soft Transparent Hand Stretch Film at Factory Price - Plastic Shrink Wrap for PackagingNegotiableMOQ: 1000 Kilograms
-
PET Release Film Transparent and Matte Insulation Film JB1256-77 Standard for Industry Use in RollNegotiableMOQ: 1 Tray
-
Foam PackagingNegotiableMOQ: 2300 Pieces
-
PE Bottom Film for Sanitary Napkin and DiapersUS$ 2 - 2.35MOQ: 1 Ton
-
Transparent Low Density Polyethylene Plastic Film for FoodUS$ 0.5 - 3MOQ: 100 Rolls
-
High Quality 9 Color Printed PVC Shrink Sleeve LabelUS$ 2,190 - 2,250MOQ: 1 Ton
-
PE FilmNegotiableMOQ: 1
-
Transparent Stretch Film in RollsNegotiableMOQ: 25 Boxes
-
Made in China Superior Quality Anti-UV Plastic FilmNegotiableMOQ: 5000 Kilograms
-
China Lldpe Pallet Stretch FilmUS$ 1.72 - 2MOQ: 100 Rolls
