High Quality Silver Thermal Lamination Metallized Pet Film
high quality silver thermal lamination metallized pet film
Application :
gift boxes,composite packaging etc
Specification :
Thickness :10mirco-28mirco
Width:180mm-1850mm
length:150m-6000m
Paper core 76mm(3″),25.4mm(1')
Clouor: silver,Rose,Gold,Green,Red and ect.
Features :
1.excellent optics capability
2.high gloss and low haze
3.the packing :150m-300m usual use 1 inch ,above 300m is 3inch
Item |
|
Unit |
Index |
Test conditions |
|
Tensile strength
|
MD |
Mpa |
220 |
Temperature 23°C Relative humidity 40% |
TD |
Mpa |
208 |
||
|
Elongation at Break |
MD |
% |
126 |
|
TD |
% |
108 |
||
Friction of coefficient |
The surface without Al plating/surface without Al plating |
---- |
0.57 |
|
|
Equality of aluminized layer
|
% |
±5 |
||
|
Adhesion of the aluminzed layer(the indicated by the discrete areas of the alumiun layer )
|
% |
6 |
||
|
Wetting tension of Aluminum layer
|
Mn/m |
54 |
||
Aluminized layer resistance |
|
2.0 |
||
Moisture vapor transmission rate |
g/(m2·24h) |
0.98 |
Temperature 38°C Relative humidity :91% |
|
Oxygen trnamission rate |
Cm3/(m2·24h·0.1Mpa) |
1.75 |
||
Why do we use PET thermal lamination film?-PET metalized thermal lamination film
1 Healthy Lamination Process
It is non-hazardous to health and safe to use as being without toxic gases nor volatile content.
It is also safe during laminating process due to no solvent-based adhesive used.
2 Easy Operation
It requires no action of using and blending the rubber, solvent, diluent and so on which is much easier during handling and cost-saved compared with the old way.
No special technique required, just laminate when the temperature gets adequate.
It is recommended to laminate the film with dry laminator. Just small adjustment to the machine needed if the film is laminated with wet laminator...
3 High Efficiency and Energy-saving
Production cost is substantially reduced due to no wastage of film generated, no mixing of adhesive, no coating and drying processes, nor UV heating lamp required.
4 Outstanding Function and Effect
It enhances the finished item's value through high transparency and super luster finish.
Preventing lamination from being pressed, bubbled and desquamated.
Protected from harmful substances and water-proof, ensuring a long life storage for the printings.
Particularly, the matte is good for spot UV and hot stamping.
How to use the PET metalized thermal laminating film ?---Note Points
1.Laminating tempeture:85-115℃
2.The processing pressure:60KMP
3.Our film is dry laminating film so the ink dry on the surface when you laminate on
PET metalized thermal laminating film ----Gold laminating film
PET metalized thermal laminating film ---silver laminating film
Our products is used by the machine .-----the maching is following
Welcome to your kindly inquiry !
Send Inquiry to This Supplier
You May Also Like
-
PET Release Film Transparent and Matte Insulation Film JB1256-77 Standard for Industry Use in RollNegotiableMOQ: 1 Tray
-
Silage Film Silage Stretch FilmUS$ 2.0 - 3.5MOQ: 1000 Kilograms
-
Foam PackagingNegotiableMOQ: 2300 Pieces
-
PE Bottom Film for Sanitary Napkin and DiapersUS$ 2 - 2.35MOQ: 1 Ton
-
Transparent Low Density Polyethylene Plastic Film for FoodUS$ 0.5 - 3MOQ: 100 Rolls
-
High Quality 9 Color Printed PVC Shrink Sleeve LabelUS$ 2,190 - 2,250MOQ: 1 Ton
-
PE FilmNegotiableMOQ: 1
-
Transparent Stretch Film in RollsNegotiableMOQ: 25 Boxes
-
Made in China Superior Quality Anti-UV Plastic FilmNegotiableMOQ: 5000 Kilograms
-
China Lldpe Pallet Stretch FilmUS$ 1.72 - 2MOQ: 100 Rolls



