12MIRCO.15MIRCO/18MIRCO BOPP Metalized Film for Paper Laminating

Thermal Laminating Film is an environmental friendly product, it has the features as below:

#1 Healthy Lamination Process
It is non-hazardous to health and safe to use as being without toxic gases nor volatile content. 
It is also safe during laminating process due to no solvent-based adhesive used. 
#2 Easy Operation
It requires no action of using and blending the rubber, solvent, diluent and so on which is much easier during handling and cost-saved compared with the old way. 
No special technique required, just laminate when the temperature gets adequate. 
It is recommended to laminate the film with dry laminator. Just small adjustment to the machine needed if the film is laminated with wet laminator...
#3 High Efficiency and Energy-saving 
Production cost is substantially reduced due to no wastage of film generated, no mixing of adhesive, no coating and drying processes, nor UV heating lamp required. 
#4 Outstanding Function and Effect
It enhances the finished item's value through high transparency and super luster finish. 
Preventing lamination from being pressed, bubbled and desquamated. 
Protected from harmful substances and water-proof, ensuring a long life storage for the printings. 
Particularly, the matte is good for spot UV and hot stamping.

In order to guarantee high product quality, we carry out very strict management principle all the times.

Every detail of processing is well controlled with special attention.

In case of a bad roll found, we will make compensation as responsibility.

About Samples

* Samples for testing are available and free

* Usually sized 400mm*100mof each glossy or matt roll

* For favorite measures, please feel free to advise

* The freight for sample delivery is at receiver's side

* But to be refunded by deducting from the right coming order automatically

* For saving the cost, we recommend the way of prepaid instead of collect

About Capacity

* 2 coating lines

* 20 days delivery of a 20 feet container

* 400MTs (kilograms) per month

* Thickness from 15micron (10BOPP+5EVA) to 32micron (18BOPP+14EVA)

* Roll width from 180mm to 1680mm

* Roll length from 2000m to 6000m

* Reel inner diameter at 25.4mm (1 inch) or 76mm (3 inch)

* Reel Outer Diameter: 240mm to 380mm (upon reel length and width)

• Application manual- metalized thermal laminating film

      1.  Adjust roller pressure and temperature according to different types of paper and ink. 
        2. When using the film for the first time or changing to other sizes, we recommend a small trial volume

            before going into fully mass lamination. 

        3. The following situation will affect the quality of the film during lamination. 
             a. When using metal ink 
             b. When the ink contains too much wax, dried oil, adhesive, and silicon additive. etc 

             c. When the ink is too thick 
             d. When the ink is not completely dry 
             e. When the paper contains too much moisture 
             f. When there is too much powder