1.introduction

wheelchair tie down system is self-adjusting and self-tensioning 2offering a quick and flexible solution to securing wheelchair.

This wheelchair tie-down system is self-adjusting and self-tensioning, offering a quick and flexible solution to securing wheelchairs. The wheelchair tie-down system is particularly adequate as it is compact and can either be used with floor pockets, bolted to the carriage floor or mounted under a flip seat. Retractable and static lap/ shoulder belts are also provided for passenger comfort and safety. These products have already been exported to many countries, such as Australia, Austria, Spain, Italy, Philippine, Malaysia, New Zealand, Israel and so on.

XINDER considers safety as its single most important priority and ensures that all products are thoroughly tested to the industry’s highest standards.

After-sales Service

Xinder-Tech warrants the original buyers that Xinder-Tech will repair or replace any part failed due to defective material or workmanship during warranty period. Details are as follows:

1. 1.    Warranty Period:

• Ø  Warranty Period: 12 Month from the delivery date from seller.
• Ø  Repair or replace parts failed due to defective material or workmanship during warranty period.
• Ø  Repair or replace parts of power units failed due to defective material or workmanship during warranty period.
• Ø  The parts can be got from Xinder-Tech Electronics.

1. 2.    After-sales Service

• Ø  If there is some problem happened, please call Xinder Quality Department (0086-519-85139690) o, we will analyse the problem and give solution within 24 hours. If the problem is failed due to defective material or workmanship, we will provide part free for replacement.
• Ø  If you need to return some part for repair, please give us advanced notice as possible, and allow reasonable amount of time to repair it.Shipping charges for returning parts to Xinder-Tech shall be the responsibility of the customer. Xinder-Tech will pay shipping charges when returning warrantable parts to the customer. Xinder-Tech will not accept C.O.D. shipments of any returned goods.
• Ø  The warranty does not cover: Malfunction or damage to parts caused by accident, misuse, lack of proper maintenance, improper adjustment, alteration, mechanical of vehicle, hazards, overloading, failure to follow operating instruction, or acts of nature (i.e. weather, lightning, and flood).
• Ø  Xinder's obligation under this warranty is exclusively limited to the repair or exchange of parts that fail within the applicable warranty period.
• Ø  Xinder-Tech assumes no responsibility for expenses or damages, including incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply.

1. 3.    Note and Warning

• Ø  Xinder-Tech recommends that this product should be inspect very six months, and it is batter to do some maintenance if necessary at that time. Details of maintenance can be seen in User Manual.
• Ø  This lift has been designed and manufactured to exact specification. It is hazardous to make any modification.
• Ø  The warranty is void if: Modification to any parts of this lift is not authorized by Xinder-Tech. Moreover, it is dangerous.
• Ø  Xinder-Tech has no responsibility for any personal injury or property damage due to the operation of lifts that has been modified from our original design. No one or company should alter lift without written authorized by Xinder-Tech.