Contact Platform Support
Help CenterResonant Battery Charger for Electrical Car 12V/15A Fast Charging
Related Products
-
Fast Battery Charger SeriesNegotiableMOQ: 1 Set -
Battery Fast Charger 12V/20A for Vehicle Switching Power SupplyNegotiableMOQ: 1 Set
-
Mobile Battery Smart Fast Charger 48V/25A for Electric Cars VehicleNegotiableMOQ: 1 Set
-
Battery Smart Fast Charger 24V/35A for Electric Cars VehicleNegotiableMOQ: 1 Set
-
Battery Smart Fast Charger 24V/50A for Electric Cars VehicleNegotiableMOQ: 1 Set
Fast Charger
Introduction
This charger could charge for WET or VRLA(GEL/AGM) Lead-acid battery.
We use nonlinear control technology which designed by our company, the charger in high-effiency,low harmonic wave,long life,reliable, the performance reaches high level in the market.
Air-cooled AC220V input, suitable for charging 12V battery, the maximum output current of 15A.
Applying the switching power supply technology and intelligent charging technology, According to the battery charge current capacity, automatic charge strictly according to the characteristic curve of the battery , charging mode is three stages style as "constant → (average charge voltage value) constant voltage reducing current → (automatic identification converted) trickle float" the charger communicates and talks to the battery, solves the charge rate limitation of the battery, saves the charging time for you.
Parameters
| Input | Voltage:AC220V±15% OR AC110V±15% | ||||
| Frequency:47~63Hz | |||||
| Voltage Regulation | ≤±1% | ||||
| Max effiency | 90% | ||||
| Output Voltage | 12V | ||||
| Output Current | 15A(Fit for 100-150AH lead-acid cell) | ||||
| Max Power | 216W Max(14.4V15A) | ||||
| load regulation | ≤±1% | ||||
| Output Accuracy | Output Voltage stablize accuracy:±1% | ||||
| Output Current stablize accuracy:±1% | |||||
| Max dB | 60 DB | ||||
| Cooling Method | Air Cooling | ||||
| Working Enviroment | Working Temp.:-20℃ ~ +50℃ | ||||
| Storage Temp.:-40℃ ~ +85℃ | |||||
| Altitude below 3000meters | |||||
| Seismic SAEJ 1378 | |||||
| Safety and EMC | Safety IEC 60335-2-29 | ||||
| I/P →O/P:3KVac ;I/P →FG:115 Kvac | |||||
| O/P →FG :0.5KVac | |||||
| I/P →O/P,I/P →FG,OP →FG | |||||
| 100MΩ/500Vac/25℃/70% RH | |||||
| EN55014 | |||||
| EN 61000-3-2/3 | |||||
| EN55014 | |||||
| Demension/Weight | 198 mm x 95 mm x 55 mm(LxWxH) / 2KG | ||||
Automatic Charging Process
Trickle → constant current → constant voltage(pulse)→ costant current(time limit)→ full
Charging Curve
Protetion function
| Input Over/low voltage protection | when input voltage higher or lower 15% of rated voltage,charger will be not work, when voltage in right scope,charger will work automatically. | |||||
| Output Over/low voltage protection | When output voltage higher than rated value or out current higher than rated value, charger will switch off,after trouble shooting switch on and charger will work. | |||||
| Short-circuit protection | when output short-circuit, charger will swtich off automatically,after trouble shooting,charger will work automatically. | |||||
| Over-temerature protection | when inside temp. over 85℃,charger will swtich off automatically,and when temp. recover below 85℃,charger will work automatically. | |||||
| battery reverse connect protection | when" + "," - " in charger connect reverse of battery,charger will switch off automatically. | |||||
Automatic temperature compensation function
When temperature higher or lower 25℃, charger output compensate -50mV/℃ or +50mV/℃ automatically.
Equalized charging function
When battery is full, press"stop",charger stop working, and press"Equalized charging"(light on),and then press"on", charger will equalized charge automatically.
Automatic equalized charging function
When battery is full, charger will keep time 5 hours, after 5 hours if the battery is still "online",charger will start equlized charging
Features
- Digital display
- Protection function
- Auto Temp. compensation
- Eqalized Charging
- Dust-proof
- Portable
- power and output customizable
high charging efficiency, simple, light weight, small size
1. Gathers information from a battery.
2. Analyses the information.
3. Makes decisions.
4. Takes actions.
Advantages
reverse polarity protection function
overload protection function
short circuit protection function
overheat protection function
delay start, soft-start, power memory
1. Accuracy of charge -- no overcharge!
2. Speed of charge --Fast or Slow or anywhere in between.
3. Increased battery life at all speeds.-50% +
Applications
1. Telecommunications
2. UPS Systems
3. Airport Equipment
4. Military
5. Forklifts
6. Solar Energy
7. Wind Energy
8. Grid storage/Leveling
9. Electric Transport
10.Railways
Purposes
1. Capital equipment and infrastructure cost reductions for industries.
2. Battery replacement cost reductions.– Longer battery life.
3. Faster availability of operational equipment.
4. Improved field capability in military applications.
5. Increased mobility/range for E-bikes/E-Cars
Note: We can customize depending on your requirements.
Send Inquiry to This Supplier
You May Also Like
-
ALLEN-BRADLEY Smart Motor Controller SMC-3 150-C43NBRNegotiableMOQ: 1 Piece
-
Dimmable Waterproof Power Supply 48V 150W for Commercial LED Strip LightsNegotiableMOQ: 10 Pieces
-
ANDW Series Pure Sine Wave InverterNegotiableMOQ: 1 Set
-
Switching Power SupplyNegotiableMOQ: 2700 Pieces
-
Scrap Recycle Computer Hardware Untested Computer Power SuppliesNegotiableMOQ: 10000 Pieces
-
CX-9001 1KVA Knob Type Variable AC Power Supply Unit of Single Phase Input and Single Phase OutputNegotiableMOQ: 1 Piece
-
Universal Travel Adapter&power Power Converter Adapter Power SupplyUS$ 100 - 5,000MOQ: 10 Sets
-
Hot Sales 5050 Smd Led Strip Power SupplyUS$ 0.78 - 1.5MOQ: 1000 Poles
-
(DC Power Supply) QJ12003E 100% Original&New!!NegotiableMOQ: 1 Set
-
TS-001 Mini Circuit Breaker 12V Power Supply Din Rail ChannelNegotiableMOQ: 100 Pieces
