Contact Platform Support
Help CenterTemperature Control
Related Products
Specifications
process control instrument:Automatic Cold Junction Compensation For Thermocouple.Auto Wire Length Compensation For 3Wire RTDProcess Control Instrument
FEATURES:
Based On State Of Art Latest Micro controller Technology With Control action Modes 'ON / .OFF' or 'PID'.
Easy Programming With Password Protection.
Software Calibration with Front Panel Push Buttons.
Dual L.E.D Display :1)Upper for 'Process Value' Display 2)Lower for 'Set Point Value' Display.
Input RTD (PT-100), J & K Type, 4-20 mA; factory settable.
Automatic Wire Length Compensation For 3 Wire RTD (PT-100).
Automatic Cold Junction Compensation For Thermocouple.
One Set Point With Controller Relay Output & Hysteresis Programmable by user.
Set Point 2 For Relay 2 or 4-20 mA O/P; Programmable by user.
Adjustable Time Delay For Operation Of The Relays.
Modbus RTU Protocol with Isolated RS-485 Communication.
APPLICATIONS:
- Oven Control.
- Food Processing.
- Cold Storage & Chilling Plant.
- Constant Temperature Bath & Environmental Chamber.
- Plastic / Packaging / Rubber & Metal Industry.
- Engineering Industry like tiles, Machine Tools, Automobile parts, stone cutting tools manufacturing.
- Petroleum Industry for Viscosity measurement bath control
TECHNICAL SPECIFICATIONS: | ||||||
Input |
4 - 20mA Input |
RTD (PT - 100) |
K - Type |
J - Type |
||
Range |
-999 To 9999 |
-50 To 400°C |
0 To 1200°C |
0 To 750°C |
||
Resolution |
0.001, 0.01, 0.1, 1 |
0.1°C |
0.1°C |
0.1°C |
||
Accuracy |
±0.25 % of Full Scale |
±0.25 % of Full Scale |
±0.25 % of Full Scale |
±0.25 % of Full Scale |
||
Compensation |
Automatic wire length compensation for Long wire RTD (PT - 100) sensor Automatic Cold Junction Compensation for Thermocouple (J or K type) |
|||||
Display |
Upper : 4 digit, 0.56" (13 mm), 7 - Segment RED L.E.D display for 'Process Value' indication Lower : 4 digit, 0.56" (13 mm), 7 - Segment RED L.E.D display for 'Set Point Value' indication of RL1 |
|||||
L.E.D. Indication |
RL1 & RL2 for Relays, TX & RX for communication PRG to show 'User' in Programming mode & O/P to show 4 - 20 mA O/P is selected instead of the Relay 2 |
|||||
Set point |
Independent set points setting for RL1 & RL2 |
|||||
Hysteresis |
1 To 100 counts, Independent setting for RL1 & RL2 |
|||||
Control action |
LO -HI, HI-LO, LO- Very LO, HI - Very HI control action for relay; programmable by user |
|||||
Time delay |
0 To 9999 sec, Common setting for RL1 & RL2 to operate after the 'Process Value' crosses the 'Set Point Value' |
|||||
Relay contact type |
1 NO - C - NC Relay Contact Rated 230 VAC/5A for RL1 & RL2 |
|||||
Configuration of relay |
RL1 operates for Set point 1, RL2 operates for Set point 2 ( RL2 is optional) |
|||||
Fault condition |
In 'Under', 'Over' OR 'Open' condition i.e. fault condition, Relay can be made OFF or ON; programmable by user |
|||||
Setting |
Setting by 4 keys on front panel i.e. 'SET / NEXT', 'UP' , 'DOWN' & 'BACK' |
|||||
|
Monitoring : Sensor Open / Under / Over |
i) By Display : Sensor 'Break/ Open' shows 'oPEn', 'Under' range shows 'Undr' & 'Over' range shows 'ouEr' ii) By Retransmission current O/P : Upscale current : 21 mA, Down scale current : 3 mA; programmable by user |
|||||
|
Retransmission output (Optional) |
i) 1 No. 4 - 20 mA output with MAX Load 750 ohms ii) Range: As per the Input type, Low range / High range: Anywhere in the range (High range > Low range) |
|||||
Communication |
Modbus RTU Protocol with Isolated RS-485 Communication |
|||||
Supply Voltage |
230 VAC ± 10% OR 110 VAC ± 10% OR 24 VDC |
|||||
Operating Temp. |
- 40 To 85°C |
|||||
Relative Humidity |
Below 95% non condensing |
|||||
Enclosure Detail |
PANEL MOUNTING (PM) |
WEATHERPROOF (WP) |
FLAMEPROOF (FLP) |
|||
Protection Class |
IP - 40 |
IP- 65 |
IP-65, CMRI for IIA & IIB Gas group |
|||
Cabinet Material |
ABS Plastic, White Colour |
Polycarbonate, Grey colour |
Cast Alluminium alloy, LM-6 / C.I. Enclosure |
|||
Cable Entry |
Terminal connector for connection |
Thermoplastic cable gland (IP - 68) |
Double compression cable gland (Ex-Proof),ET-type |
|||
Dimension |
96 (H) X 96 (W) X 120 (D) in mm |
215 (H) X 240 (W) X 120 (D) in mm |
300 (H) X 250 (W) X 110 (D) in mm |
|||
Cutout |
92 (H) X 92 (W) in mm |
- - - - |
- - - - |
|||
Mounting |
Panel mounting |
Wall Mounting / Stand Mounting |
Wall Mounting / Stand Mounting |
|||
Weight |
Approx. 1.0 Kg |
Approx. 2.5 Kg |
Approx. 4.0 Kg |
|||
Send Inquiry to This Supplier
You May Also Like
-
Honeywell EC7890B1028 Burner Control EC7890 B 1028 Honeywel EC7890B1028/UNegotiableMOQ: 1 Piece -
Water Transfer Mould Temperature MachineNegotiableMOQ: 2 Sets
-
TN220 Flexible Mounting Infrared Imager With High-Quality Thermal Imaging & POE SupportNegotiableMOQ: 1 Piece
-
The Cheaper Price Temperature Control Thermostat Electric Add Wifi Function Thermostat With RemoteUS$ 12 - 28MOQ: 10 Pieces
-
Gas Cooker Thermocouple Universal Gas ThermocoupleNegotiableMOQ: 1
-
3G/GPRS Temperature Data Logger S260 Record and Alarm for Remote Monitoring Temperature, Humidity,current,voltage and so onUS$ 1 - 10MOQ: 1 Piece
-
Hot Sell Gsm Remote Terminal Unit Gprs/ftp Data LoggerUS$ 80 - 150MOQ: 1 Piece
-
SMALL&HIGH SENSITIVITY Pid Temperature ControllerUS$ 0.01 - 0.02MOQ: 1 Unit
-
EA2-TX-100-HD TransmitterUS$ 1 - 2MOQ: 1 Piece
-
Bimetal Thermostat 250V 5A-25ANegotiableMOQ: 1000 Pieces
