Energizer Charger for Effective Electric Fencing System

energizer charger for effective electric fencing system

Technique specification:

1.Input voltage: 12 V DC                                                                  

2.Output voltage: 12 KV

3.    Pulse width: 100 us ( 1/10000 second)

4.    Switch to 1.5s or 2.5s mode freely

5.    Automatic switch between day mode and night mode

6.    Input power: 110-240 V AC

7.    Six operation mode

8.    Water-proof and anti-dust

9.    Working length: 200 m to 20,000 m for different models

10.   Stored energy: 1.0-5.0 Joules for different models

11.   Max output energy: 1.0-5.0 Joules for different models

one unit in a box

four units in a carton

Weight:2.72KG/unit

Size:34x29x11.5cm/pcs

Precautions:

Please read all instructions before using the energizer:

Do not connect the fence to any other device.

Lightning may strike your fence.A severe electric shock hazard exists to anything connected to the fence or in near proximity to grounding system.

If connecting energizer to AC power source, only use provided AC adapter. The energizer connected to AC power shall be covered adequately to protect it from tain,snow or other moisture.keep out of reach of chindren.

Don’t not charge the battery with abattery charger while the energizer is connected.

Disconnect and remove battery if re-charging is necessary.

Do not connect more than one energizer to fence at one time.

Do not connect two fences to the same energizer.

Keep fence at least 2 yards away from other fences with meatl posts.

Do not connect energizer to barbed wire or razor wire.

Do not install fence or grounding system within 10 yards of electrical power lines,telephone lines,or telecommunications equipment.

If running leads underground ,use insulated wire and conduit rated for a minimum of 12,000v0lts.Prevent water from entering conduit.

Keep young children away from the electric fence at all times.

Do not touch the fence with head ,neck or torso.

Do not clim over ,through or under a multi-wire electric fence.Use a gate or disconnect the fence wires to cross.

Do not put electric fence in areas og public access.

Clearly mark the electric fence in several locations if located where people unfamiliar with the fence may come into its proximity.Check your locak and state laws regarding placement of electric fences.

Keep fences clear of obstructions or other objects that could potentially cause a person or animal to become entangled in the fence.

Do not use a water pipe,well,or your main power system ground as the ground for your energizer.If lightning were to strike the fence , the current culd travel through the system causing a severe electrical shock hazard.

Place the grounding rod in a location that I will not cause a person or animal to trip into fence or be trapped between the ground wire and the fence.

Always mount the energizer securely such that it will not fall if bumped by an animal or person.

Dis connect energizer if conditions are extremely dry and represent high risk of fire.

Keep combuible materials away from fence ,energizer and battery.

Please contact to learn more about us.