High temperature resistant heat insulation and preservation coating

Specifications

The product adopted advanced aerospace heat insulation material, can work in the temperature from -80aaaa1700aa, thermal conduct

[Characteristic]

 

 Shielding heat rate: 90%                  

 

 The coefficient of thermal conductivity: 0.03w/m.K

 

 The level of :A                                                            

 

Anti Acid (500h):unchanged

 

 

[Application]

 

High temperature kiln chamber, the high temperature pipe, low temperature cold storage pipeline, etc

 

 

 

 

[Package]

 

1/20kg

 

 

[Function]

 

 The temperature can be lowered from 1700°C to 100°Cafter coating12mm GD-1.

 

 The heat loss will be not more than 30% in external surface of hearth kiln only with 6 mm of GD-1 .

 

The surface with the coating will be smooth and reflect IR from fire, so it can decrease the loss

of absorbing heat, and the temperature will be higher , and the energy will be saved.

    Below zero 30 °C, the temperature of case with 10mm GD-1 will not over 0°C.

 

There is no chlorine ion in the coating, so can prevent or in the process of wet chloride and

sulfide in air l can’t contact the metal surface to get good anti-corrosion for metal surface also won’t lead to metal welding embrittlement.

 

The insulation coefficients is very high, so it has good insulation effect in room temperature

and high temperature .

 

The coating also can be fire retardant, different requirement different thickness, the things

with the coating can be barbecued and deform, the things can be protected.

 

 

[Caution]

 

Every time thickness is about 1 mm, two hours later after evaporation of water fully, then the

coating can be coated repeatedly.