50 KG Wheeled CO2 Fire Extinguisher

50 KG Wheeled CO2 Fire extinguisher
Fire extinguisher
9kg co2 fire extinguisher
Wheeled Gas Fire extinguisher
Characteristic:
Carbon Dioxide extinguishers are filled with non-flammable carbon dioxide gas under extreme pressure. You can recognize a CO2 extinguisher by its hard horn and lack of pressure gauge. The pressure in the cylinder is so great that when you use one of these extinguishers, bits of dry ice may shoot out the horn.
CO2 cylinders are red and range in size from 5 lbs to 100 lbs or larger. In the larger sizes, the hard horn will be located on the end of a long, flexible hose.
Carbon dioxide extinguishes work by displacing oxygen, or taking away the oxygen element of the fire triangle. The carbon dioxide is also very cold as it comes out of the extinguisher, so it cools the fuel as well. CO2s may be ineffective at extinguishing Class A fires because they may not be able to displace enough oxygen to successfully put the fire out. Class A materials may also smolder and re-ignite.
CO2s will frequently be found in laboratories, mechanical rooms, kitchens, and flammable liquid storage areas.
All CO2 extinguishers at USC undergo hydrostatic testing and recharge every five years.
How to use:
1. Pull the Pin at the top of the extinguisher. The pin releases a locking mechanism and will allow you to discharge the extinguisher.
2. Aim at the base of the fire, not the flames. This is important - in order to put out the fire, you must extinguish the fuel.
3. Squeeze the lever slowly. This will release the extinguishing agent in the extinguisher. If the handle is seleased, the discharge will stop.
4. Sweep from side to side. Using a sweeping motion, move the fire extinguisher back and forth until the fire is completely out. Operate the extinguisher from a safe distance, several feet away, and then move towards the fire once it starts to diminish.
5. Be sure to have read the instructions on your fire extinguisher.
Notice:
Keep away from children.
Do not incinerate.
Avoid inhalingthe dry chemical agent.
Do not test . Any use will cause pressure loss.


1. Q: What is your product range?
A: We have manufactured the fire hydrants, fire hose, sprinkler system, fire alarm valve system and other equipment since 1982.
2. Q: Can I order sample first to test the quality?
A: Yes, sample order is accepted. We can send you the sample to test our quantity.
3. Q: What is the basic information need for the fire hose?
A: It need the information of size, material, type, and working pressure.
4. Q: How to pay?
A: We accept T/T, Western Union, and L/C.
Send Inquiry to This Supplier
You May Also Like
-
Other Fire EquipmentNegotiableMOQ: 2000 Sets
-
Firefighting Safety GlovesUS$ 10 - 20MOQ: 50 Pairs
-
Fire Hose Box 575*575*215mmUS$ 43 - 43MOQ: 20 Pieces
-
Hose CouplingNegotiableMOQ: 1
-
Aluminum CouplingUS$ 0.08 - 12.9MOQ: 220 Pieces
-
Photoluminescent FilmUS$ 20 - 30MOQ: 1 Square Meter
-
45w Big Power Firefighter Used MegaphoneUS$ 30 - 50MOQ: 200 Pieces
-
Virtual Fire Extinguisher Training SimolatorUS$ 3,950 - 4,580MOQ: 1 Set
-
Deluge Valves HighNegotiableMOQ: 1
-
Fire Sandbox, Fire Storage Cabinet, Fire Fighting EquipmentUS$ 200MOQ: 1 Unit











