Super Spray Paint Remover

glitter spray paint

Features: 

7CF®  The product can be used to remove self-drying alkyd coatings, amino coatings, nitro coatings, acrylic coatings and some epoxy coatings, low temp cured coatings. It is mainly used for the parts of autos, motors, machine, equipment, etc where the coatings need to be removed.

 1. Clean surface thoroughly, removing all dirt, grease, oil, wax, rust, moisture, etc. Cover adjacent areas to protect from spray mist. Use at room temp.

2. Shake can vigorously for 1-2 minutes before spraying and occasionally while in use to ensure color uniformity and prevent clogging.

3. Hold the can 20-30cm from the surface to be sprayed, press spray button firmly with steady even strokes while moving can rapidly back and forth.

4. 2 to 3 films with 20-35μm thick are better. Intermittence of 5-10 minutes between each film is recommended.

5. Sunlight resistant varnish is recommended to improve the weather resistance of films when used outdoor. Special UV-resistant varnish can be produced to satisfy special demands of customers.

6. Avoid spraying in rainy day or freezing environment.

7.Dry to handle in 1 hour. Recoat within 1 hour or after 24 hours.

Precautions:

1.Keep in ventilated cool and dry places.

2.Do not clash, puncture, or incinerate the can.

3.Keep out of the reach of children.

4.If eye contact, immediately flush eye with plenty of clean water and seek medical advice.

5.If skin contact, flush skin with running water (and soap if available) and seek medical attention in the event of irritation.