Contact Platform Support
Help CenterPA System Peripheral Equipment Emergency Evacuation Controller
Related Products
-
Rack Mounted Automatically pa System Professional Lightning ArresterUS$ 220 - 500MOQ: 10 Units -
PA System 20W 16 Channel Professional Power SequencerUS$ 100 - 200MOQ: 10 Units
-
PA System Peripheral Equipment Speaker Line DetectorUS$ 210 - 400MOQ: 10 Units
-
Automatic Power Supply 10 Channel DC24V PA System Relay SupplyUS$ 130 - 195MOQ: 10 Pieces
-
PA System Emergency Digital Voice Alarm Controller System With Background Music SystemUS$ 300 - 600MOQ: 100 Pieces
PA System Peripheral Equipment Emergency Evacuation Controller
This easy to install controller features Auto, Manual, and Isolate modes, selectable via the key switch. When selected to the Auto position the panel will respond to any signal received from the buildings Fire Indicator Board(FIB), This signal then activates the alert tone. If, after a pre-set time this condition has not been attended to, the panel will change to the evacuation mode. The evacuation tone will continue to sound until the panel has been reset.
In the manual position any of the functions may be initiated from the front panel controls.
This isolates the unit so that the alert, evacuation and bell tones will not function.
Provisions have been made for BGM source to be played through the controller. BGM is automatically muted when any other function is operated.
A microphone input has been included on the front panel. This can be used for either general or emergency paging. The Voice Over Message can be recorded by setting the rear panel Mic Record switch to ON, the message can be any length from 1 to 20 seconds.
* Stand alone control unit.
* Interfaces with Fire Indicator Boards.
* Remote operation of Alert, Evac, Chime & Cancel tones.
* Auto / Manual / Isolate keyswitch.
* Local operation of Alert, Evac and PA.
* Provision for voice over message.
* Microphone socket for PA use.
* Provision for BGM.
* Switched DC 24V output for override relays on volume controls.
* Switched DC 24V output for strobe operation for Alert mode.
* Switched DC 24V output for strobe operation Evac mode.
* On-board timer for remote alert activation adjustable from 30secs to 7.5min in 30second increments.
* Auxiliary level output.
* Suitable for any amplifier with an auxiliary input.
* Can be used as a standard PA system.
Model |
T-6247 |
Output Level |
0dBm(775mV) |
THD |
0.05% |
Frequency Response |
100Hz~18KHz |
S/N Ratio |
Aux/Music Input -85dB Alert/Evac/Chime -70dB |
Input Sensitivity |
MIC 5mV Balanced BGM/Aux Input 350mV Unbalanced |
Power Supply |
~110V/60Hz or~230V/50Hz & DC 24V |
Power Consumption |
15W |
Weight |
2.5Kg |
Dimensions |
484x209x44mm |
ITC promise the electronics yearly failure rate is less than 1%.
ITC guarantee all electronics of 3 years quality warranty.
ITC could supply 1% wearing spare parts free of charge.
ITC guarantee all loudspeakers of 6 months quality warranty.
All of quality complaint shall be attached with serial number, failure test report and photos.
All of the quality compliant shall be feedback with a solution within 48 hours.
ITC could supply circuit diagram documents for repair.
Send Inquiry to This Supplier
You May Also Like
-
High Accuracy NTC 10K 3950 Underfloor Heating Temperature Sensor TPE Injection Molded ProbeUS$ 0.7 - 1MOQ: 1000 Pieces
-
Professional Wireless DJ Audio Mixer - 6-Channel BT Compatible DJ ControlNegotiableMOQ: 1
-
2014 High Quality 1U Wholesale Home Power Amplifier E-200US$ 330 - 630MOQ: 1 Piece
-
New Design Monitor Speaker StandUS$ 7 - 8MOQ: 200 Pieces
-
9V3Ah LiFePO4 Battery for LED LampNegotiableMOQ: 100 Packs
-
Roto Mold Plastic Home LightNegotiableMOQ: 100 Sets
-
Power Amplifier 2.0 Channel Professional Power AmplifierUS$ 20 - 50MOQ: 100 Pieces
-
Multimedia Central SystemUS$ 90 - 150MOQ: 5 Sets
-
Dual 10'' Line Array Neodymium Driver HornUS$ 1 - 5,000MOQ: 1 Set
-
1500w Mini Fog Machine /smoke MachineUS$ 1 - 100MOQ: 1 Piece
