China supplier!High elastic environmental protection waterproof coating (G01)

Product description(G01)

Scope of application

This product can used to waterproof wet primary treatment and other waterproof materials with the use of, and can be singly used as waterproof layer, for all types of building waterproof, waterproof layer, underground buildings dampproof and waterproof. Kitchen, bathroom, swimming pool, water seepage leakage, underground pipeline corrosion, waterproof protection layer in steel tile. Roofing waterproof, bathrooms, basement, swimming pool, pipe, the top of the hill, sports venues and special structure of waterproof can be done by replacing a SBS membrane and polyurethane waterproof material. Can be painted with the sex, no omission

Implementation standards

GB50207-94

Key points of construction

l Primary treatment

l The formation of a solid grassroots must clean water, yin and yang angle should be made into a circular arc shape. The old level should be the original rupture, the drum of the waterproof layer and dust inter net, indentation damage smoothing, leakage has must first plugging treatment, grassroots to smooth, do not have Mingshui. Rainspout orifice lattice joint and other special parts should be first flexible seal the deal, brushing procedures in general to Yin and yang angle, and vertical plane. Finally, large area construction.

l Bottom coating construction

l The water and paint by 1:3 weight ratio of mixing, mixing evenly, the use of primer coating can improve the penetration of the base, and enhance the adhesion force.

l Paint coating

l Is used in the construction of the rolling, scraping and brushing, can and should adopt the multi layer coating and brushing time should not too thick, generally divided into 3-4 times brushing, the total thickness of 1.0-1.5mm and to be first coated coating is dry rear can be coated after coating again, weak links should be paving the carcass reinforcing material. Dosage of about 1.5kg-2.5kg/m2.

l Construction procedure

1. General use of roller coating method construction, paint mixing before use, water use is prohibited. Construction temperature should be above 4
2. Brushing the direction and length of the trip should be consistent, in order, the next, the left and right of the brush, no leakage brush.
3. Each process to wait for the coating curing dry before the.
4. The laying direction and the pressing width of the cloth are in accordance with the requirements of the international, and the fabric is smooth, beautiful and generous. Requirements without wrinkling and drum phenomenon.
5. For the water mouth and Guan Zigen should be laying a layer of matrix to increase the strength of waterproof cloth.
6. For regular trample, touch the waterproof layer, should be a thickness of about 1:2.5 above the 2mm cement slurry protection layer, and compacted, cast light, to ensure that the cement mortar and waterproof material.
7. The facade wall waterproof, brushing the final again paint immediately after uniform Fu sprinkle sand, dry solid iron prison, the wipe cement mortar protective layer

Technical performance index

Notice

Before construction, paint should be fully mixed evenly, in addition to the bottom of the paint shall not be free to add water to ensure quality. Overlay the carcass reinforcing material, in general should be pasted on the second coat. Is strictly prohibited in 4 DEG C or snow and freezing weather construction, in front of the film action shall not in the coating on the other construction operations, so as not to destroy the waterproof layer, waterproof effect.