Hot Sale SBS/APP Modified Bitumen Waterproof for Construction

SBS asphalt waterproofing membrane
(1) Product Description:
SBS modified bitumen membrane is made by saturating the base in bitumen, or thermoplastic elastomer (such as styrene butadiene-SBS), reinforced with polyester or fiberglass, finishing the upward face with fine sands, mineral states (or grains) or polythene membrane etc.
(2) Features:
a) Good impermeability
b) SBS modified bitumen membrane is specially being applied in the cold area with low temperature
c) Good performance in anti-puncture, anti-broker, anti-resistance, anti-erosion, anti-mildew, anti-weathering
d) Possess good tensile strength, elongation rate and size stability which could be well suited the substrate distortion and crack.
e) Good flexibility, anticorrosion, non-pollution, odorless, non-toxicity .
(3) Application:
suitable for civil building roofing ,underground ,bridge, parking , pool, tunnel in the line of waterproofing and damp roof ,especially for the building under high temperature, according to the roofing engineering stipulation.
(4) Technical Specification:
(5) Storage:


Jinlong company attaches great importance to product quality and after-sales service work, the "quality first , service first " as the company 'scommitment forever .In quality management , foster a sense of strict quality control to ensure the continuous improvement of product quality and improvement . In the service , the company insisted the service as an integral part of the compang's products with a good after-sales guidance and technical support to ensure the company's products can provide you better service.
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
2.0mm Textured HDPE Geomembrane Dual-Sided Friction for Slope ProtectionUS$ 9.5 - 10MOQ: 100 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces





