Contact Platform Support
Help CenterChlorinated Polyethylene/CPE Mainly for ABS,plastic Pipe Etc
Related Products
-
Non Toxic Ca-Zn Stabilizer For PipeUS$ 3.4 - 3.8MOQ: 1000 Kiloamperes -
Chlorinated Polyethylene Used as PVC Impact ModifierNegotiableMOQ: 25 Kilograms
-
Zinc Stearate 99.8%NegotiableMOQ: 25 Kilograms
-
Luminous Masterbatch for PlasticNegotiableMOQ: 25 Kilograms
-
Plastic Shopping Basket/plastic Basket/basket/supermaket BasketNegotiableMOQ: 1000 Pieces
CPE is made from high density polyethylene (HDPE)and chlorine. Its main function is to improve impact strength and flexility of rigid PVC product. Its appearance is white powder
.
- Product introduction
Chlorinated Polyethylene (CPE) is a kind of white granular elastomer, which is which is made from polyethylene and chlorine gas when they have replace-reaction in the condition of solicitation. It has good performances of combustion resistance, weather resistance, chemical medicine resistance, ozone resistance, combustion resistance, etc.. CPE has wonderful consistence and high filling with all kinds of plastics and rubber. It is an excellent plastic additive and also is a special rubber with good general performance.
- Properties and specification
Chlorinated Polyethylene has good performances of combustion resistance, weather resistance, chemical medicine resistance, ozone resistance, combustion resistance, etc.. It can be mixed with PVC, PS and PC. With good compatibility, it can be used to produce plastic alloy and improve integrative performance of related materials.
CPE specification
Index |
Unit |
Type |
|||
CPE135 |
CM135 |
CPE230 |
CM140 |
||
Chlorine content |
% |
33-37 |
33-37 |
28-32 |
38-42 |
Heat of melting |
J/g,≤ |
2.0 |
2.0 |
5.0 |
2.0 |
Volatile content |
%,≤ |
0.4 |
0.4 |
0.40 |
0.40 |
Screenings(0.9mm) |
%,≤ |
2.0 |
- |
2.0 |
— |
Chromoplastid |
100g,≤ |
60 |
- |
60 |
— |
Shao's hardness |
A,≤ |
65 |
60 |
70 |
70 |
Tensile strength |
MPa,≥ |
6.0 |
6.0 |
6.0 |
6.0 |
Mooney viscosity ML(1+4),121 |
MV,≤ |
- |
80 |
- |
110 |
Use
NO. |
Performance |
Use |
CPE135 |
It has advantages of good softness, low temperature tenacity, high strength, high filling, anti-aging, anti-impact, etc. |
Used in profiled bar of doors, windows, plastic pipes and board plates etc.. |
CM135 |
High tenacity, high elasticity, high tensile ratio, oil resistant, combustion resistance, etc. |
Widely apply to waterproof coil material, transportation strap with combustion resistance, oil resistant, glue tube with heat resistant, bike tyre, color strap, cable and wire jacket, etc |
CPE230 |
Good softness, good filling, aging resistance, chemical resistance and processing performance |
Used in producing magnetic stripe of refrigerator, cold resistant cable sheath, also used in producing rubber products |
CM140 |
High mechanical strength, good tenacity, good aging resistance, and good compatibility with PVC |
Used in PVC calendered film, PVC waterproof coiled material etc..
|
Send Inquiry to This Supplier
You May Also Like
-
PPS Needle Felt for Dust Filter Bags Sewing/ PPS Dust Filter Bags/ Ryton Filter MaterialUS$ 5 - 8MOQ: 1 Piece
-
Chemical AuxiliariesNegotiableMOQ: 2400 Kilograms
-
Sodium Gluconate CAS 527-07-1 25kgUS$ 100 - 2000MOQ: 1 Ton
-
Automatic Spray System Release Agent for Automotive Parts - 20L Drum CapacityUS$ 1 - 4MOQ: 200 Kilograms
-
Zeolite Carbon Sieves 3a 4a 13x Adsorbent for Oxygen Concentrator Generator Molecular SieveNegotiableMOQ: 1
-
Modified Starch for Paper IndustrialUS$ 630 - 650MOQ: 5 Tons
-
NA Cmc Powder Food GradeUS$ 550 - 3,690MOQ: 5 Tons
-
Diapers Baler Hydraulic Pressing Baling MachineUS$ 3,200 - 3,250MOQ: 1 Set
-
Leather Wall Panel for Background and Ceiling PanelUS$ 3 - 6MOQ: 200 Pieces
-
AC Blowing Foam Blowing Agents of AzodicarbonamideUS$ 2,100 - 2,680MOQ: 1 Ton
