PA hot melt adhesive powder // suitable for print industry,printingmaterial factory

PA polyamide hot-melt adhesive:

The products are mainly used in the clothing industry, automobile industry, the footwear industry and the reflective material, adhesive, laminated fabric shirts, non textile adhesive; no solvent pollution, no burning; adhesive has the advantages of simple process, a bonding strength and good flexibility, the advantages of both bonding and sealing etc.

Model No.: T0556A

Appearance: white powder 

Main ingredients: polyamide

Water temperature: 40 °C

Dry cleaning performance: excellent

Toxicity: non-toxic

Melt temperature: 110-120 °C

Size: 40-80

Density: 0.94g/cm3 (g / cm3)

Melt index: 38g/10min (g /10)

Recommended use temperature: 110-150 °C

Features: for hot melt adhesive interlining hot drilling, belongs to the powder press adhesion.

Instructions for use:

The surface of the powder coating on bonding, infrared, steam or other heat source, general adhesive layer temperature needed to achieve the recommended use temperature.

1.packaging: 20 kg of fiber paper bags;

2.storage conditions: ventilation, dry, cool place;

3. equipment cleaning method: to equipment manufacturer cleaning equipment, or with mineral oil or paraffin cleaning equipment in 150 °C, then rinse with hot melt adhesive, glue temperature should not exceed 160 °C.

The matters needing attention:

1, the use of places should be good ventilation, away from the fire.

2, avoid the melted material contact with eyes, skin.

3, if the molten materials come into contact with the skin, immediately the injured skin immersed in water or cold water wash, etc. after cooling off stick to silicone rub swellings, hospitalized.