C Shaped Quartz Heating Tube, Abnormal Shape Heating Lamp

Specifications

Features:

1. Surface temperature of heater divides into three grades:

Low temperature:400°c--600°c

Mid temperature:600°c--800°c

 High temperature:800°c--1000°c

 2.Relative radiation characteristic:

This quartz heater component has strong transmission at far infrared,compared with other kinds of far infrared products,when the wavelength>6Lj,radiation energy is particularly remarkable

3.The spectrum emissivities:

The quartz heater the component have no coating ,and milky white quartz tube playing a radiation role promptly, also supporting and insulate role.

Note:We can also produce and process as customers' requirements.

Infrared Heating Technology /principle

The infrared heating lamp produces Hertzian waves, when its frequency closes to natural frequency of the molecular sport of the heating object, causes all the molecular in the object resonance, they friction and occur energy.

Because of the difference of the natural frequency of the heating resistance material ,in order to be suitable to different material ,it should be different infrared wave by changing the material of the heating thread and circling technique, in this way, the frequency of Electromagnetic waves of infrared heating lamp closes to that of natural frequency of the molecular sport of the heating object to some extent to reach the aim of heating . The formula between the Electromagnetic wave frequency and the wave length who can translated each other.

Nowdays, infrared radiation used in the industry are mainly whose length 0.76~1.6um short wave, and the wavelength 1.6~4 um center wave and the wave length longer than 4 um the long wave. The short wave radiation also be called the near-infrared radiation, center wave and the long wave also be called the far infrared radiation. Because heating inertia of the infrared radiation is very little, and whose master wave length 0.76~1.6um short wave, about 1.6~4 um middle wave, more than 4um long wave. short wave also called near infrared radiation, middle wave and long wave also called far infrared radiation. Because of heating inertia of the infrared is very little, short wave and middle wave radiation technology are used  to heating with high consistency, high energy, high strength, that can improve heating quality, shorten heating time, reduce investment amount ,lessen environment polluted, which called high infrared radiation heating technology by industry group

Our products have the following prominent merit:

Wave length :0.76~25um

Effective thermal efficincy using rate: 86%

Heating inertia: It will reach 50% rated power after closing circuit about 1-2 sec ,and work in full power after closing circuit about 2-4 sec; also ,the temperature decrease are rapid.

Rated power: 30W----10000W, the single hole lamp may achieve above 6000W.

Outer surface coating:

Coating whole or part with the valuable heavy metal such as King, Titanium as well oxide, such as Zirconium, Aluminum, which can improve heating efficiency greatly.

Life time

Below 2000W’ S more than 5,000 hours if be used continuously;

Above 3000W’ s more than 3,000 hours if be used continuously.

Controlling

It to be made up servomechanism of the temperature with temperature controlling apparatus and booster

Specification

Power: 30-6000W     Voltage:24V-110V,220V-415V      Length:60mm-3000mm

Wall thickness

1.0mm , 1.2mm , 1.5mm, 2.00mm,  or as customer’s requirements

Shape

Single hole lamp, double holes lamp ,round shape lamp, special shape lamp;

We can design , produce and process all kinds of shape needed