Different Shapes Carbon Quartz Heating Lamp

Specifications

 Infrared quartz heateing element  

Tungsten halogen lamp belong to thermal radiation light source, the lamps and lanterns have convenient installation, do not need any accessories, ac/dc circuit can use, etc. Mainly used for industrial heating or drying, such as: circuit board docking, all kinds of baking finish on, the film, heating, etc. When using clean, health, temperature controlled, can be in the atmosphere for drying, heat, also can be in a vacuum. Infrared tungsten halogen lamp, can use level, but also the special equipment heat, and can be upright produce different color temperature near, far infrared ray, in light of the spectrum, can use different shapes of tungsten do heating source. Such as: triangle filament, even the asana filament (even the asana is refers to the filament and stents are one), intermittent filament and some other material heating source, etc. ShiYingYuan infrared lamp and the near infrared lamp transparent or translucent, grinding or milky white, quartz glass tube, can produce as shell near, far infrared radiation spectrum line. And according to the customers' requirements shall be separately design production different lengths, different color temperature, different shapes of single and double hole infrared ray.

Our products have the following prominent merit:

Wave length :0.76~25um

Effective thermal efficincy using rate: 86%

Heating inertia: It will reach 50% rated power after closing circuit about 1-2 sec ,and work in full power after closing circuit about 2-4 sec; also ,the temperature decrease are rapid.

Rated power: 30W----10000W, the single hole lamp may achieve above 6000W.

Outer surface coating:

Coating whole or part with the valuable heavy metal such as King, Titanium as well oxide, such as Zirconium, Aluminum, which can improve heating efficiency greatly.

Life time

Below 2000W’ S more than 5,000 hours if be used continuously;

Above 3000W’ s more than 3,000 hours if be used continuously.

Controlling

It to be made up servomechanism of the temperature with temperature controlling apparatus and booster

We can design , produce and process all kinds of shape needed

The infrared radiation characteristic of high energy and high density shorten the heating time as well the length of the heating rough channels ,and saves space of equipment occupy ,which reduce investment cost on equipment and workshop; at the same time, .because of improving the using rate of effective thermal efficiency greatly, it will save huge electricity used, and reduce producing cost.