Exterior Aluminium Blinds

Rotation of the lamellas regulates the temperature and light in the room and provides for comfortable interior temperature even in hot weather.

Outside blinds work as a modern architecture element on office buildings, schools as well as family or apartment houses. Rich palette of lamella colours brings a stylistic means for creative design and facade look. Wide lamellas adjusted from inside to any angle prevent curious looks from outside having a free view from inside.

Outside blinds may be installed to window directly or to a pre-created space under or on the facade.
You can control the blinds manually or with a motor drive. Central control is suitable for multiple blinds. One drive may operate more than one blind – but maximum three blinds per one drive located in the middle of the set. One rule must be observed – on each of the motor’s sides maximum 5 bearings – rotation gears may be placed.

 Outside blinds advantages:  

1. Regulate the light;
2. Lower the outside noise;
3. Operated manually or with electric drive;
4. Long life-span;
5. Extensive colour card; 

Technical data:

Max. width:       400cm

Max. width of connected blinds operated by motor drive: 800cm

Min. width:        40cm operated with a crank
Min. width:        60cm (55cm) operated with motor drive
Max. height:      400cm
Max. area:     9m2 operated with a crank
Max. area:     14m2 operated with motor drive

Lamellas are made of aluminium rolled to a C shape with reinforced edges - surface treated from both sides, 80mm wide.
Upper profile is made of zinc-coated steel sheet 56x58mm, lower profile is made of extruded aluminium of the same width as lamellas. Guiding profiles 20x20mm are made of extruded aluminium. Covering sheet is a bent aluminium sheet 1.5mm thick. Textile carriers and strips are made of a special synthetic fibre.

We produce the outside blinds is 20 colour shades. In case of larger order any RAL colour is possible.