Contact Platform Support
Help CenterSplice Terminal and Connector
Related Products
Specifications
Splice terminal and connector1.Least loss;
2.Anti-loosening;
3.Well corrosion resistance;
4.ISO 9001:2000;
Splice terminal and connector
Application&Structure
Full tension preformed conductor splice follow the break connection, damage repair and so on, can replace the widely used hydraulic connecting pipes, burst pressure connecting tubes connecting methods.
Full tension preformed conductor splice is made from the inner section of tension continue, filling section, the outer section of three parts.
1)The inner rods Shall be used to follow steel core;
2)Filling rods shall be installed in the inner layer, guaranteeing installation of the same diameter and the diameter ACSR.
3)The outer line splicing is designed to follow basic agreement Traverse only slightly increased to compensate for the length of stripped of the aluminum wire.
Characteristics
1.The grip strength of full tension preformed conductor splice forces up to the rated breaking strength of strands, such as electrical conductivity than ACSR long.
2.Full tension preformed conductor splice can be restored ACSR Tension follow the breaking strength of 100% and 100% of the wire resistance.
Consideration
1.Whether or not the new and old wire, steel core and aluminum wire must be installed within the length of the article follow the surface thoroughly polished, bright and clean the surface after the coated surface quality immediately, and the conductive grease wire match, and then Start the installation.
2.When connecting the wire section of the mid-point and point alignment damaged during installation, the end lengh of full tension preformed conductor splice has been installed from end of the preformed armour rods or short preformed armour rods is not less than 150mm, only wire damage on the last point in the support points or damage point, we can continue with this article, and play follow the maintenance performance of the above article.
3.Full tension preformed conductor splice can only be used once.
Send Inquiry to This Supplier
You May Also Like
-
Phoenix Contact D-32825 Blomberg Terminal BlockNegotiableMOQ: 1 Piece
-
Terminal Block & Wiring PostNegotiableMOQ: 2600 Pieces
-
WAGO 235 Spring Terminal Block 3.81/5.0mm Pitch for PCBUS$ 0.025 - 0.03MOQ: 10000 Pieces
-
Scart Plug to 5X Scart Jack,Scart Socket VK4-0065US$ 0.1 - 1.99MOQ: 2000 Pieces
-
TB-400 Assembly Type Barrier 400 Amp Japan Terminal Block ConnectorUS$ 0.1 - 5MOQ: 60 Pieces
-
Temperature Sticker Used in Power Distribution Block/Irreversible and Reversible Combined/WaterproofUS$ 88 - 175MOQ: 40 Pieces
-
Fire Retardant TP Type ABS Copper Mojec Test Terminal Block High Voltage Test Terminal BlockUS$ 13 - 15MOQ: 100 Pieces
-
Screw Type 4 Pole Din Rail Terminal Block TC-2004US$ 0.5 - 3MOQ: 1 Piece
-
Ceramic Terminal BlockUS$ 0.05 - 10MOQ: 1000 Pieces
-
48 Core Distribution Box Fiber Optical Distribution Panel for CommunicationUS$ 16.3 - 21.3MOQ: 10 Pieces
