Contact Platform Support
Help Center1.4876 Bar 800H 800T Pipe UNS N0881elbow N08811flange Incoloy 800H Alloy
Related Products
-
800H Pipe 800T Coil N08810 Flange N08811 Steel 1.4876 Bar Incoloy 800H AlloyUS$ 18 - 21.5MOQ: 1 Kilogram -
N08800 Heat Resistant Alloys 1.4876 Incoloy 800 AlloyUS$ 27 - 35MOQ: 1 Kilogram
-
Solution Heat Treatment 1040 ~ 1120 Celsius Degree Heat Resistant Alloys N08330US$ 55 - 65MOQ: 1 Kilogram
-
Composition Comprising Ni and Cu UNS N04400 Corrosion Resistant Alloys Monel 400US$ 35 - 41.5MOQ: 1 Kilogram
-
2.4819 Corrosion Resistance Oxidizing Atmospheres Alloy N10276 Hastelloy C-276US$ 55 - 63MOQ: 1 Kilogram
1.4876 bar 800H 800T pipe UNS N0881elbow N08811flange Incoloy 800H Alloy
Heat Resistant Alloys
800H / 800T (UNS N08810 / N08811), comparable to Incoloy 800H Alloy
800H, UNS N08810 / NAS 800T (UNS N08811) are nickel-iron-chromium alloys that provide high strength and excellent resistance to oxidation and carburization at high temperatures. High creep strength is attained through control over crystal grains—via high temperature heat treatment, together with fine control over carbon, titanium, and aluminum content.
Provide forms as following,
Workability performance Incoloy 800H Alloy
Whether for hot working or cold working, 800H/800T offer workability similar to austenitic stainless steels. For hot working, temperatures should be between 1000 and 1230℃, although light work may be done at temperatures as low as 850℃. To prevent cracks, we recommend avoiding the temperature range between 650 and 800℃. Although cold workability is similar to austenitic stainless steels, work hardening tends to be slightly lower.
Weldability Incoloy 800H Alloy
As with standard austenitic stainless steels, 800H/800T may be welded using techniques such as TIG, MIG, and shield metal arc welding. AWS ERNiCr-3/AWS ENiCrFe-2 welding rods are often used.
Heat Treatment in the strickly condition Incoloy 800H Alloy
800H/800T exhibit an austenite structure similar to austenitic stainless steels, and appropriate heat treatment procedures and requirements are similar. Typical heat treatments are as follows:
- Solution treatment: 1100~1170℃; rapid cooling
For applications requiring creep rupture strength in high-temperature environments, the following ASTM B409 heat treatment may be used:
Solution treatment:
- 1121℃ minimum (UNS N08810)
- 1149℃ minimum (UNS N08811)
Properties at High Temperatures testing report Incoloy 800H Alloy
Because of its high nickel and chromium content, 800H/800T resist oxidation and carburization at high temperatures. 800H/800T are superior to Type 310S and approach 600 alloy in resistance to oxidation. Offering superior high-temperature strength nearly equal to N06600, 800H/800T are widely used in applications requiring heat resistance, as they do not become brittle due to sigma phase precipitation during use. While 800 alloy is generally used at temperatures below 600℃, 800H/800T are recommended for applications requiring superior creep properties at higher temperatures.
Corrosion Resistance stress corrossion cracking resistance Incoloy 800H Alloy
800H/800T offer superior corrosion resistance in oxidizing corrosive environments such as nitric acid or nitric acid-sulfuric acid. Likewise, they perform well in sodium salt and other molten salt environments, with stress corrosion cracking resistance surpassing standard austenitic stainless steels.
Applications in chemical plants Incoloy 800H Alloy
800H/800T are widely used in chemical plants, heat treatment furnaces and other high-temperature environments.
1. If we travel to China to checking your facility, are you welcome?
Of course, why not?
we will provide the whole accompany from you landing in China.
Only Give us a call before your arrive.
We will pick up you from the airport, living in our company's hotel, and driving by car take you visiting our company.
Warm Welcome!
2. How many sales person in your team?
present 8 sales, but more hands help in work, total team is 20+ workers.
So do not worry, not the one person company.
3. How Many Years of your company working in this industry?
We are 20+ years, from last century.
Expanding the market, and cultivate our techniques, two ways all in work together.
4. Could you show me some photos of your producing working?
here, following is our working plant, all is same when you come to China to audit.
Caroline Waiting for you!
Welcome your calling.
Email guanartee reply within 1 hour.
Send Inquiry to This Supplier
You May Also Like
-
Cobalt Metal Base Alloys Stellite 6 Alloys for SaleNegotiableMOQ: 10 Kilograms
-
Nickel Tube and PipeUS$ 50 - 80MOQ: 500 Kilograms
-
Good Reputation Wholesale Hastelloy C276 Plate in StockUS$ 30 - 52MOQ: 1 Ton
-
Punching Nickel Plated Low Carbon Steel Belt Small Circular ApertureNegotiableMOQ: 100 Kilograms
-
JIS Standard HL Finish Nickel-Based Alloy Rod GH4099/GH3039/GH4648 Environmental Protection Equipment Industry Stock Production FactoryUS$ 10000 - 40000MOQ: 1 Ton
-
GH4169 Alloy BarNegotiableMOQ: 100 Kilograms
-
Nickel Arc Targets Customize Size Nickel Sputtering Target 99.95%NegotiableMOQ: 1 Piece
-
Nickel FoamNegotiableMOQ: 1 Piece
-
Nickel 200 Wire MeshUS$ 1 - 100MOQ: 10 Pieces
-
Incoloy Alloy 800H Seamless Nickel Alloy Pipe, BS 3074NA16 ASTM B 163 ASTM B 423 ASTM B 704 ASTM B 70US$ 17500 - 50000MOQ: 100 Kilograms
