Zinc Alloy Drywall Easy Drive Anchor
zinc alloy drywall anchor is one piece self-drilling anchor designed for use in hollow gypsum wallboard for light duty loads.
It is available in both engineered nylon and zamac alloy for use with either a No.6 or No.8 screws in 3/8” to 1” wallboard.
The zinc alloy drywall anchor is formed from engineered nylon for use with No.6 screw in 3/8”to 5/8” wallboard.
1. Ideal for mounting electrical fixtures ,fastening drapery supports,installing phone systems,miscellaneous hardware,etc
2. Packaged and offered with and without screw.
1. Insert wither No.2 or No.3 Phillips driver bit into the recess of the zamac alloy anchor head.
Use a manual screwdriver or a low rpm battery powered electric screw gun.
2. Push the anchor into the surface of the wallboard until the two cutting bladed penetrate the surface.
Using gentle forward pressure,rotate the anchor until the collar sets flush to the sueface of the wall.
3. Put the fixture in place,insert the screw and tighten until it feels secure.
As the screw is threaded into the nylon versions,the point will expand resulting in increased load capacity in thicker wallboard.
Note: When use a n electric screw gun for application,set clutch and use slow speed(do not exceed approximately 300-400rpm).
Send Inquiry to This Supplier
You May Also Like
-
Automotive Spare Parts Car Universal Body Shield Retainer Bumper Fastener Nylon Clips Car Door Panel Clip Auto Plastic RivetNegotiableMOQ: 1
-
54mm High Pressure Hose Clamps for PipeNegotiableMOQ: 1
-
38*38mm Double Holes Metal Slot TubeUS$ 1 - 5MOQ: 800 Pieces
-
Zinc Steel 1/4" to 1" Wedge AnchorUS$ 0.34 - 0.34MOQ: 10000 Pieces
-
Universal Metal Plug Made in ChinaUS$ 0.1 - 99MOQ: 10000 Pieces
-
Wire Rope Open Socket(10-40mm)US$ 3 - 170MOQ: 1000 Pieces
-
Steel Concrete Lifting AnchorUS$ 0.1 - 20MOQ: 1000 Pieces
-
AnchorsUS$ 0.001 - 0.1MOQ: 50000 Pieces
-
2015 New Plastic Insulation Anchor/ Insulation Fixing With ScrewUS$ 0.03 - 0.03MOQ: 5000 Pieces
-
Suction Anchor PlusNegotiableMOQ: 1000 Sets




