With CE and ISO certificates factory sale rotary clay drying machine/clay dryer machine

Specifications

 With CE and ISO certificates factory sale rotary clay drying machine/clay dryer machine

Clay dryer machine

Work site of clay dryer machine

Introduction of clay dryer machine

1.New type clay dryer machine with new type heat pipe structure, give material an indirect 

heated dryer.

2. Under the traction of hot air blower,enter and heating heat pipe,heat pipe heat transfer

to the material,due to material and heat pipe to full contact,so the drying out of material to

is better than common cow dung dryer's drying effect of the market. 

3. The new type clay dryer machine's device enables real-time water vapor emitted from

the top,and the end of the steam heat recovery and utilization,is a new type high efficient

energy- saving drying equipment.

4. New type clay dryer machine is based on over 28 years' experience, independent of 

the development and production of a new type of high efficiency energy - saving drying

equipment.

5. Clay dryer machine uses heat pipe indirect to materials heating, materials and heat source

to full contact, steam to real- time from the top of device , heat source use hot - blast stove

heating not consumption, with dry effect good, and structure reasonable, and output big,

and energy consumption low, and install convenient, and operation simple, and to range

wide such as advantage of, is feed such as powder materials the most ideal private device.

Features of clay dryer machine

1. Within the device is composed of dozens to hundreds of heat pipes materials enter from

the top of the heating duct fell after drying the bottom of the device,get to the bottom will be

hot after shave plate scraped the bottom of the tube material keeps contact with heat pipe to

have a drying effect. This can greatly improve thermal contact area and utilization of the material.

2. The device has wet discharging device in the drying process can be a result of discharge

large amounts of water vapor in the first time, the complete separation of water vapor drying

faster the lower heat loss, because it avoids the material in the process of drying and water

vapour exposure to eliminate the material may not be caused by repeated drying of moisture

absorption.

3.Tail of air circulator,we can heat reuse of tail up into a dryer really do make full use of heat

to achieve energy - saving effect.

Raw material of clay dryer machine

1) Wood sawdust, wood chip, wood shavings, etc.

2) Coal powder, coal slurry, coal waste, etc.

3) Clay, slurry, etc.

4) Grain, such as wheat, rice, etc.

5) Mash, diatillers, etc.

6) Animal dungs.

Structure of clay dryer machine

Clay dryer machine consists of seven parts: they are feeding hopper, heat source, rotary 

drum, lifting board, draught fan, unloader. 

Features of clay dryer machine

1. Large production capability, continuous operation

2. Simple structure, convenient operation

3. Low malfunction, low maintenance cost.

4. Wide scope of application, can be used to dry the granular materials, favorable for those

materials with the big adhesion.

5. Great operating flexibility, the output of the products allows a larger fluctuation range, not

influencing the quality of the products.

6. High thermal efficiency(≥ 60%)

7. Medium temperature in outlets(about700 degree)

8. Alloy steel plate or stainless lifting plate

9. Guaranteed drying effect (≤ 5% after drying)

10. Final wood sawdust's humidity can be adjusted by adjusting its speed.

11. Far-ranging raw material: such as wood sawdust, wet sand, clay, coal, etc.

Main parameter of clay dryer machine

Customers came to our factory to check our clay dryer machine

Delivery site of clay dryer machine

If you are interested in our clay dryer machine, please contact:

In order to provide you the most suitable clay dryer machine, could you share

me the following details? Thanks!

1) What's your raw material?

2) How many kilograms raw material do you want to dry up per hour?

3) What's your raw material's dimension?

Our factory:

FAQ of clay dryer machine

1. What the clay dryer machine can be used for ?

Clay dryer machine can dry many kinds of granules materials which contain moisture, such as

coal, coal slurry, slag, industrial waste, clay, sand, cow dung, chicken dung, grain, etc. They

are widely used in building materials, metallurgy, and chemical industry.

2. Is the clay dryer machine's heating source directly contact with clay?

Clay dryer machine's heating source can provide about 700-800℃, so it will be very dangerous

if hot air directly contact the dry raw material. In order to avoide this, our clay dryer machine has

designed a special equipment to avoide hot spark enters into rotary drum.

3. Can I use the coal or gas as the heating source?

Yea, you can use coal, gas, electricity, oil and wind power to heat the cow dung dryer.