BLTB165 hydraulic breaking hammer suitable for 30-45 ton excavator

1.Specification of BLTB165 hydraulic breaking hammer for excavator.

(Top type breaking hammer)

  (It is suitable for 30-45 ton excavator.)

2.Excavator list for BLTB165 hydraulic breaking hammer for sale.

BLT165 top type is suitable Doosan Daewoo DH370, DH420,DH380/ Hyundal R360, R420,R430/ Komatsu PC360, PC400/ Hitachi ZX360/ Cat336, / Volvo EC360, EC420

3.Advantage for BLTB165 top type hydraulic breaking hammer .

---Easy control ,friend used and easy position make it more convenient to excavator work

---Without side-weight, reducing the rate of chisel breakage

---Longer total-length and heavier total-weight, can used for broking roof or top of constrition roof.

4.Payment terms for BLTB165 top type hydraulic breaking hammer.  

T/T payment at sight---30% of payment in advance, 70% of payment before shipment.

5.Package for BLTB165 top type hydraulic breaking hammer .  

Each hydraulic breaker will be wrapped with protective wraps and then packed with wooden boxes as following show:

Pictures one:

6.warranty period for BLTB165 top type hydraulic breaking hammer .

(1) 12 months or (1500 hrs):   Cylinder,Piston,Valve, Back head *
(2) 06 month or (1000 hrs):    Front head *
(3) 03 month or (500 hrs):      Front bush, Brackets *
(4) 01 month or (100 hrs):      Chisel Pin, Accumulator *
Note:All the warranty covered from Invoice Date/ Hrs which ever is earlier and must for proper maintenance only*

7.Attention in using BLTB165 Top Type hydraulic breaking hammer
(1) Donot lift things with the breaker. Lifting materials by hanging wire in the bracket or the chisel not only causes damage to the breaker but also is very dangerous when operating.
(2) On a hard or large rock, start breaking at an edge. Even a hard and big rock can be relatively easily broken when hammering begins at a crack or an edge.
(3) Do not allow the breaker to fall to break a rock. Dropping the breaker onto a rock will apply excessive force to the breaker or the base machine, causing damage to many parts of the breaker and the base machine.