2.5'' SATAII SSD

Specifications

2.5'' SATAII SSD
DuraClass Technology
Support NCQ,RAID and TRIM(Windows7)
Support SMART Command
ECC 24bit per 512 byte

KDSF12MXXX
Item	Model	KDSF12MXXX
General	Form Factor	2.5"
	Interface	SATAⅡ
Performance	Capacity(GB)	60GB	120GB	240GB
	Sustained Read	283MB/S	285MB/S	285MB/S
	Sustained Write	271MB/S	273MB/S	273MB/S
	4KB Random Read IOPS	30,000	30,000	30,000
	4KB Random Write IOPS	10,000	10,000	10,000
	Average Access time	0.1ms
Storage Media	NAND Flash	MLC-NAND Flash
Power Consumption	input Voltage	5V+/_5%
	Idle	0.5W
	Active	2.0W	2.0W	2.5W
Reliability& Endurance	Write endurance	16years @100GBytes write and erase per day at 60GB
	Read endurance	unlimited
	Wear-Leveling Algorithm	Dynamic and static wear-leveling
	Data Retention	10years at 25ºC
	MTBF	2,000,000hours
	ECC	Supports BCH ECC 24bits in 512 bytes
	Bad Block Management	Auto Bad Block Management in system
Environment	Operating Temperature	0~70°C
	Non-operating Temperature	-40~85°C
	Shock	2,000G(@0.3ms half sine wave)
	Vibration	20G(40-2000HZ)
	Ambient Humidity	5-95%
Warranty	2years
Available unit	Available	NO EOL
Testing Platform	Intel Core2 Q8200 2.33GHz,DDR2 800 2GB*2 double channel,Intel P45+ICH10R
	chipset,Win7 7600 RTM
Testing Software	ATTO Disk Benchmark 2.34.0.0
Physical Dimensions & Weight	Height(mm)	9.5+/_0.25
	Width(mm)	69.8+/_0.25
	Length(mm)	100.2+/_0.25
	Weight(g)	80
The read and write speed is limited to this test platform.