TRS090 auto ac a/c compressor Mazda 121 1997-2003 Metro DW/ 1992-97 DB Mazda 1989-1999 MX-5 NA/ 1999-2005 MX5 NB kompressor 4pk

Specifications

4pk kompressor TRS090 Mazda 121 1997-2003 Metro DW/ 1992-97 DB auto ac a/c compressor Mazda 1989-1999 MX-5 NA/ 1999-2005 MX5 NB

 

Our factory can produce many kinds of auto Air Conditioner Compressors with good quality and one year quality warrantee. 

TRS090 MAZDA 121 1.3L 94-97 121 METRO 97-, MX5 PV4 COMP

 

 

 

 

Specification:

Model Number: INTL-XZC601

Car name: MAZDA 121 MX-5

Compressor Type: TRS090

Grooves: PV4

Year: 1989-2005

Volt:12v

 

Details

Mazda 121 Metro DW, 1997-2003

1997 kompressor for Mazda 121

Kompressor 1998 MAZDA 121

1999 kompresor MAZDA 121

2000 MAZDA 121 compressor

2001 Mazda 121 kompressor

2002 Mazda 121 metro DW kompressor

2003 Mazda 121 TRS090 kompresor

 

Mazda 121 DB, 1992-1997

1992 Mazda 121 DB

1993 Mazda 121 DB

1994 Mazda 121 DB

1995 Mazda 121 DB

1996 Mazda 121 DB

1997 Mazda 121 DB

Mazda MX-5 NA, 1989-1999

1989 Mazda MX-5 NA

1990 Mazda MX-5 NA

1991 Mazda MX-5 NA

1992 Mazda MX-5 NA

1993 Mazda MX-5 NA

1994 Mazda MX-5 NA

1995 Mazda MX-5 NA

1996 Mazda MX-5 NA

1997 Mazda MX-5 NA

1998 Mazda MX-5 NA

1999 Mazda MX-5 NA

Mazda MX-5 NB, 1999-2005

1999 Mazda MX5 NB

2000 Mazda MX5 NB

2001 Mazda MX5 NB

2002 Mazda MX5 NB

2003 Mazda MX5 NB

2004 Mazda MX5 NB

2005 Mazda MX5 NB

 

 

  

 

Basic Requirements when servicing an A/C system:

 

1, The Accumulator or Filter Drier should always be replaced when the Air Conditioning System is opened. For warranty Purposes buyer must show evidence of receiver/drier replacement. In some vehicles the drier comes attached to the condenser so it must replaced as well

 

2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed; however in some instances it may be necessary to replace the condenser or other items.

 

3. Orifice tube must be replaced; expansion valve must be inspected and replaced if dirty or defective.

 

4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.

 

5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days, this time should be increased to effectively remove air and boil off moisture.

 

6. The Orifice Tube, if equipped, should always be replaced and the Expansion Valve, if equipped, should at least be inspected for proper operation if not replaced