Contact Platform Support
Help CenterKafuter Auto Glass Silicone Sealant
Related Products
-
Kafuter Kitchen High-temperature Waterproof SealantUS$ 3 - 8MOQ: 10 Cases -
Kafuter Pneumatic Sealant GunUS$ 3 - 8MOQ: 10 Cases
-
Shenzhen K-5911 Car Light Sealing Sealant SiliconeUS$ 3 - 10MOQ: 10 Cartons
-
Kafuter K-5906Z fo Solar Panel Sealing Silicone SealantEUR 1 - 6MOQ: 5 Cartons
-
Kafuter Bathroom Silicone Sealant Gun PricesUS$ 3 - 8MOQ: 10 Cases
Specifications
auto glass silicone sealant1.one-part, white paste
2.muiti-purpose,fast cure in minutes
3.environment, easy to use
4.310ml/
Kafuter auto glass silicone sealant
Characteristics:
*One-part, fast cure, polyurethane sealant
* Fast cure, easy to inject, no solvents, no flowing on elevation coating
* Low-temp tolerance, oil and water proof, salt-fog resistance, and anti-aging, crack, and fatigue.
* an environment-friendly product without produce any poison and pollution.
* Have excellent compatibility with glass, metal, wood, plastics, and other multi-substrates.
* The cured surfaces can be grinded, sprayed, and coated.
Applications:
Weld, joint, and seal in cars, railways, retainers, freezers, ships, pipes and air trunks, or use as building materials sealing for water or dust proof, or car’s maintenance.
Properties:
Item |
Multi-Purpose Polyurethane Sealant |
Appearance |
White Paste |
Density(g/cm3) |
1.35±0.05 |
Initial Cure Time(25°C,min) |
10~30 |
Sagging(mm) |
≤3 |
Cure Time(mm/d) |
3~5 |
Volatility(%) |
≤3 |
Hardness(Shore A) |
35±5 |
Tensile Strength(MPa) |
≥1.5 |
Shear Strength(MPa) |
≥1.0 |
Elongation(%) |
≥400 |
Extrusion(ml/min) |
≥80 |
Working Temperature Range(°C) |
+5~+35 |
Packing:
310ml/aluminium tube |
20tube/case |
Directions
1. Use cotton yarn with acetone ethanol or other organic solvents to clean off the rust dust,water,oil,etc.
2. Remove the cover and pierce the inner seal, and then cut the nozzle in triangle shape to make sure the glue squeeze out with the same shape, using glue gun put the glue on the surfaces.
3. Best used in temperature of 5°C-35°C and humidity 35%-65%RH, keep the working condition completely ventilated
4. use the alcohol to clean the uncoated surfaces, after injecting,please tighten-seal the remained glue in a dry and cool place.
Notes:
(1)Keep away from children
(2)Avoid contacting with skin and eyes; if contact, please flush with water, or else become seriously, go to hospital
Send Inquiry to This Supplier
You May Also Like
-
Factory Sale Polyether-based TPU Material TPU Granule for Ski BootsUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons
