Contact Platform Support
Help CenterLED K-5312T Silicone Rubber Coating Silicone Powder Coating Silicone Coating for Pcb
Related Products
-
LED K-5312T Silicone High Voltage Insulator Coating Thermal Insulation Coating Rtv Coating for InsulatorUS$ 8 - 15MOQ: 10 Pairs -
LED K-5312T Rtv Insulator Coating Ceramic Epoxy Coating Electrical Insulation CoatingsUS$ 8 - 15MOQ: 10 Pairs
-
LED K-5312T Pcb Clear Acrylic Coating Pcb Protective Coating Thermal Insulation Ceramic CoatingUS$ 8 - 15MOQ: 10 Pairs
-
LED K-5312T Silicone Coating for Pcb Silicone Protective Coating Silicone Rubber CoatingUS$ 8 - 15MOQ: 10 Pairs
-
LED K-5312T Rtv Coating for Insulator Green Coating for Pcb Silicone Coating Foe PcbUS$ 8 - 15MOQ: 10 Pairs
Specifications
silicone coating for pcb1.viscous liquid
2.potting in 6mm-2cm long tubes
3.good transparency,waterproof
4.22KG
LED K-5312T silicone rubber coating silicone powder coating silicone coating for pcb
Features:
1) K-5312T is two-component, room cure silicone encapsulant.
2) It become transparent elastomer after cured, water and moisture proof, good transparency, and yellow resistance.
3) Apply in deep-section potting and fixing in 6mm~2cm.
4) Good adhesion to metals and mostly plastics(epoxy resin, polycarbonate, nitrile rubber, epdm)
APPLICATION:
Encapsulating and potting inLED module, general electronic components, PCB board, and beads in LED strip lights, led rigid bar light, etc.
PROPERTIES
Item |
K-5312T(Transparent) |
|
|
Uncured |
Appearance |
A: Clear transparent liquid B: Clear transparent liquid |
Viscosity(25°C, mpa.s) |
A: 1000~2000 B: 5~10 |
|
Density (25°C, g/cm3) |
1.10~1.05 |
|
Mix Ratio(by weight) |
A:B=100:10 |
|
Controllable Time (25°C,min) |
60~90 |
|
Mixed Viscosity(25°C, mpa.s) |
1000~2500 |
|
Initial Curing Time(25°C,h) |
5~6 |
|
Full Curing Time (25°C,h) |
24 |
|
|
Cured
|
(Shore A) Hardness(24h) |
15~25 |
Shear strength(mpa) |
≥0.5 |
|
Thermal Conductivity(w/(m.k)) |
0.15 |
|
Volume Resistivity(Ω.cm) |
1.0×1015 |
|
Dielectric Strength(kv/mm-1) |
≥20 |
|
Permittivity(100KHZ) |
2.9 |
|
Dissipation Factor(100KHZ) |
1.0~ 3.0×10-3 |
|
Directions:
1. Measurement
Fully mix component A before using, accurately weighing A part, and then put the Part B to mix with Par A by mix ratio. It can adjust by your own needs according to the specification.
2. Mixing
Put Part B in the bottle with Part A, evenly mix them immediately. And should tighten-sealed the Part B after using.
3. Pouring
Put the mixed glue evenly into the product which need encapsulate immediately.
4. Curing
The encapsulated components can be room cured, and it can put into next process after 10 to 24 hours full cure.
Send Inquiry to This Supplier
You May Also Like
-
Thermoplastic Polyurethane Raw Material Granule Tpu Resin for Shoes AdhesiveUS$ 2.22MOQ: 1 Kilogram
-
Silicone & ProductsNegotiableMOQ: 2400 Kilograms
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
