MMCX Edge Mount Mmcx PCB Connector
Specifications
mmcx PCB connector1 brass Plating: gold
2 type:mmcx PCB connector
3 apllication:microwave and rf
4 mmcx rf connector
MMCX edge mount plug short version mmcx PCB Connector
MMCX Type Series RF Coaxial Connectors
Type MMCX is a kind of microminiature connector smaller than type MCX. The characteristic is in small volume, light weight, convenient and reliable connection. They’re widely used in connection with the RF coaxial cables, transmission of RF signal, equipments or small-sized communication network that are demanding on systematic volume and weight by using surface mounting technology. It’s suitable for mass instrument equipment production and producing on the assembly line.
The MMCX series is also called MicroMateTM. It is one of Amphenol's smallest RF connector line and was developed in the 1990's. MMCX is a micro-miniature connector series with a locksnap mechanism allowing for 360 degrees rotation enabling flexibility in PCB layouts..
The micromate family of products is a 6 GHz 50 ohm interconnect system. A range of connectors are available including surface mount, edge card, and cable connectors.
MMCX Specifications
Electrical |
|
Impedance |
50 ohm |
Frequency Range |
DC - 6 GHz |
VSWR |
1.15 max. @ DC - 4 GHz |
1.40 max. @ 4 - 6 GHz | |
RF-Leakage |
60 dB minimum @ 1 GHz (flexible cable) |
Voltage Rating (at sea level) |
≤ 170 Vrms (depending on cable) |
Contact Resistance |
center contact: ≤ 10 |
|
outer contact: ≤ 5 m |
Insulation Resistance |
1,000 minimum |
Dielectric Withstanding Voltage |
500 Vrms (at sea level) |
Mechanical |
|
Mating |
Snap-on coupling |
Contact Captivation |
2.3 lbs |
Engagement Force |
≤ 3.4 lbs (15N) |
Disengagement Force |
≥ 1.4 lbs (6N) |
Durability (matings) |
500 cycles minimum |
Environmental |
Test Requirement |
Temperature Range |
-55° C to +155° C |
Thermal Shock |
MIL-STD-202, method 107, cond. F |
Moisture Resistance |
MIL-STD-202, method 106 |
Corrosion |
MIL-STD-202, method 101, cond. B |
Vibration |
3 cycles, 3 opposite directions, 10 - 150 Hz 10 - 60 Hz: 0.75mm/0.03in., 60-150 Hz: 10 G |
Mechanical Shock |
MIL-STD-202, method 213, cond. B |
Humidity |
MIL-STD-202, method 103, cond. B |
Material |
Test Requirement |
Body and Outer Contacts |
Brass, nickel or gold plated |
Male Contact |
Brass, gold plated |
Female Contact |
Beryllium copper or phosphor bronze, gold plated |
Crimp Ferrule |
Copper or brass, nickel plated |
Insulator |
LCP, PTFE or PFA |
Note: These characteristics are typical but may not apply to all connectors.
Send Inquiry to This Supplier
You May Also Like
-
Quick Connector for Power Cables – Dedicated to Cable FeedersUS$ 3 - 10MOQ: 5 Combos
-
Flanged Waterproof Sealing Hydraulic Dust Proof Cap for 7/16 Din Male Plug PlasticNegotiableMOQ: 100 Pieces
-
Wire to Wire ConnectorNegotiableMOQ: 2300 Pieces
-
USB ConnectorUS$ 0.01 - 0.03MOQ: 10000 Pieces
-
WII AV ADAPTORNegotiableMOQ: 10 Pieces
-
Wago Terminal Block With Vde 3.5 mm ScrewlessUS$ 0.0162 - 0.0209MOQ: 10000 Poles
-
Good Service no Quality Discrepancy Trade Assurance ConnectorsUS$ 0.05 - 0.5MOQ: 1000 Pieces
-
1pcs 3.5mm Male AUX Audio Plug Jack To USB 2.0 Female Converter Cable Cord Car MP3 NewesUS$ 1 - 100MOQ: 100 Quarts
-
Three Hole ConnectorNegotiableMOQ: 1
-
USB AM-BF Adaptor VK2-0058US$ 0.5 - 1.99MOQ: 5000 Pieces