4"SBR rice hulling rubber roller for SB10 rice mill machine

Specifications

1.this rubber roller is made by SBR rubber,
2.good wear-resisting,
3.the hulling capacity is 30-40tons.

Type	Wheels Type					Nested
Typt No.	XL-100	XL-152	XL-200	XL-254	XL-300	XL-355	XL-508	XL-635	XL-708
Specifications (Inch)	4	6	8	10	12	14	20	25	28
(mm) Outside diameter	223±1.0	223±1.0	225±1.0	255±1.0	270±1.0	227±1.0	258±1.0	258±1.0	258±1.0
(mm)Length	100±1.0	152±1.0	200±1.0	254±1.0	300±1.0	355±1.0	508±1.0	635±1.0	708±1.0

 

rubber roller Character:

1.Elastic stiffness, strong plasticity under the high hardness, moderate grain force, high roughness, low cardamine.
2.Good wear resistance, long using period, 3-4 times of rubber, reduce rollers number and labor intensity, improving equipment utilization.
3.Strong temperature performance, no climate impact, not deformation, soft, anti-tear at high-speed.
4.Health and non-toxic, no pollution to rice and bran, clean, bright white grain of rice, pure color quality.

 

rubber roller Usage:

Rice hulling rubber roller is the main part of rice huller machine,because of speed difference of veer and reversion between two rubber rollers, paddy are torn up by two rubber rollers.In the end, rice grains come out.

 

Attentions:

1.Handle carefully during the transportation.

2.Store in dry place,away from Acid,Alkali,Salt,oil and dirty,forbidden to put under sun for long time.

3.Take sands away from the paddy,keep paddy dry and cleaning when using the rollers.

4.Two rollers should be at the same level,the space must be equal.

5.The paddy inputting should be keep the blance.

6.Keep the rate of the re-hulling under the limited.

7.Don't make the machine work for a long time,in case effecting the hulling capacity.

8.The surrounding temperature is better under the 50°C.

9.Change the fast and slow roller at a certain time.