Commercial Pressurized Solar Collector

Specifications

               Commercial Pressurized Solar Collector

Descriptions:

Pressurized Solar Collector consists of  heat pipe collectors, a pressurized water tank, one or two heat exchangers, a circulation pump,  a expansion tank, a controller and a manometer. 

Working principles:

1. When the temperature of the Split Solar Water Heater heat collector reaches the set value, the controller will make shall the circulation pump work automatically.
2. The circulation pump makes heat-conducting liquid circulate automatically.
3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4. In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5. In case the temperature of the tank does not reach TM ax, then start the auxiliary heating device

 Specifications: 

1. Vacuum tube:  58/1800mm heat pipe solar vacuum tube

2. Copper header inside:  0.8mm thick red copper header inside

3. Outer shell:  1.6 mm thick aluminum alloy outer shell

4. Insulation layer:  35mm thick polyurethane foam insulation

5. Bracket:  45 degree 1.5 mm thick galvanized sheet steel

6. Size: 120mm*115mm

7. Application: split solar water heating system

Advantages:

1. Heat pipe solar vacuum tube

2. No water in heat pipe

3. High efficiency and less heat loss

4. Popular market: USA, Europe,Canada, Russia, Australia,New Zealand,and etc