(manufacture) Self-adhesive Asphalt Waterproof Tape, Flashing Tape, Flash Band
specifications:
HUIYUAN self-adhesive bitumen waterproof tape, hatch sealing tape, asphalt flashing tape, is s self-adhesive, aluminum or high density polyethylene surface bitumen & SBS rubber backed sealing strip. It is a quick, efficient and cost effective method of flashing, sealing and repair that produces a lasting protection in all climates.
thick |
1.2mm,1.5mm,2.0mm,3.0mm,4.0mm; |
width |
2.5cm to 1m; |
length |
2m to 20m; |
upper surface material |
PE/PET/Aluminum foil/Double self-adhesive |
Middle layer material |
No felt/ Polyester felt |
Remark |
Our specification can be customized as required |
Product features:
1)Don't need fire,donlt need adhesve glue,environment-friendly;
2)Excellent adhesive property.it can make waterproof layer be a whole body;
3)High elongation;
4)Good low temperature flexility property.
Use scope:
1)Non-exposed roof,underground project waterproof
2)Water channel,swimming pond;
3)matro project;
4)Very suitable for waterproof project which can not use fire;
5)Very suitable for cold area for it's good low temperature property.
storage:
Store the rolls horizontally between +5°C and 25°C in dry conditions in original packing.
Shelf-life approximately 12 months
package details:
usage:
* Replacement or repair of flashing
* Guttering, down pipes, skylights
* Extensions, porches & chimneys
* Caravans & Conservatories
* Sealing parapets, valley gutters
* Seals capping bolts & roof ridges
* Roof repair of portable buildings
application:
Ensure all surfaces are clean, dry and dust-free. Remove any loose particles and any rust with a wire brush & soft broom.
The use of gloves is recommended.
Rough, porous or friable surfaces (such as wood, cement boards, course brickwork, breeze blocks etc..) should be primed with a bituminous primer and allowed to dry in order to improve bonding strength. (we sell primer in 1ltr 2.5ltr and 5litre tins)
- Roll out the flashing strip then cut to the required measured length
- Remove the backing paper (peel back 150mm) and place the adhesive side to the previously prepared surface
- To ensure a tight contact - smooth the tape down with a dry cloth, removing all the air bubbles
- Press the tape to the surface firmly once in position
- Repeat the steps 2-4 in 300mm to 600mm sections until the area is covered
- If the tape is joined ensure all overlaps are greater than 25mm
- Smooth flat all edges with a wallpaper roller or trowel
- After use reseal pack and store upright in cool, dry condition



Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
Water Resistant TPO PVC EPDM HDPE Waterproofing Membrane for Commercial Buildings Modern Underlayment BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Supply of Training Towers, Steel Structure Fire - Fighting Training Towers, Military Physical Training Iron Towers, Single - and Double - Window Climbing and Rope - Descending Training TowersUS$ 1000 - 1100MOQ: 5 Metric Tons







