Hot Sale Aluminium Self Adhesive Flashing Tape
Specifications
aluminum self adhesive bitumen flashing tapethickness: 1.0mm, 1.2mm, 1.5mm, 2.0mm
width: 50MM, 75MM,100MM--1000MM
length:
hot sale aluminium self adhesive flashing tape
It is composed of surface films (PET film, aluminum foil or PE film), adhesive rubber/bitumen compound and release paper.
aluminum self adhesive bitumen flashing tape
Why buy HUIYUN bitumen tape?
The strength of the facing gives resistance to puncturing and the bitumen gives flexibility and adhesion but without the problems of slump.Designed for use as flashing on flat and pitched roofs, roof valleys, parapets and chimney stacks. Also ideal for sealing around RSJ's, flues, concrete columns, roof-lights, guttering and extractor vents.
* Replacement of worn Lead Flashing
* Lead coloured - blends with existing lead
* Crease resistant
* Easy to apply
Suitable for many uses and can be used on:-
* Replacement or repair of flashing
* Guttering, down pipes, skylights
* Extensions, porches & chimneys
* Caravans & Conservatories
* Sealing parapets, valley gutters
* Seals capping bolts & roof ridges
* Roof repair of portable buildings
General description
The bitumen flashing tape is composed of surface films (PET film, aluminum foil or PE film), adhesive rubber/bitumen compound and release paper.
Typical Uses
*Replacement or repair of flashing * Guttering, down pipes, skylights* Extensions, porches, window frames
& chimneys, jointing for artificial grass * Caravans & Conservatories* Sealing parapets, valley gutters* Seals capping bolts & roof ridges* Roof repair of portable buildings
Specification
Surface film: aluminum foil, PE or PET Width: 50mm-200mmThickness: 1.0mm-4.0mmLength: 1.0m-30m

Application guidance
Ensure that the surface is dry and free from dust, rust and loose materials.
Prime porous surface e.g. concrete and brick with a bitumen primer or black, bitumen paint, thinned with white spirit, which is allowed to dry.
Cut the flashing tape to the required length.
Peel back 5cm (approx) of the release backing paper and position carefully. Continue removing the backing paper whilst firmly placing the tape to avoid unnecessary creasing.
Smooth down so that the overall contact is complete, and ensure that all air bubbles are removed. Take care not to damage the surface of the tape.
Where tape is joined, ensure that there is an overlap of at least 1inch or 2.5cm.
After use release pack and store upright in cool and dry conditions.

Send Inquiry to This Supplier
You May Also Like
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
-
Supply of Training Towers, Steel Structure Fire - Fighting Training Towers, Military Physical Training Iron Towers, Single - and Double - Window Climbing and Rope - Descending Training TowersUS$ 1000 - 1100MOQ: 5 Metric Tons




