Contact Platform Support
Help CenterAPP Modified Bitumen Waterproof Membrane
Related Products
-
Waterproof SheetsUS$ 2.3 - 2.8MOQ: 5000 Square Meters -
APP Waterproof MembraneUS$ 1.8 - 2.9MOQ: 3000 Square Meters
-
Torched on Waterproofing SheetsUS$ 10 - 20MOQ: 500 Rolls
-
Huiyuan Brand Asphalt Waterproofing SheetsUS$ 10 - 20MOQ: 500 Rolls
-
ROOF FELT APP. 3MM 4MMUS$ 2.3 - 2.8MOQ: 3000 Square Meters
Specifications
APP waterproof membranehigh tensile strength and elongation
resistance to low temperature, corrosion
APP waterproof membrane
high tensile strength and elongation
resistance to low temperature, corrosion
Description
APP waterproof membrane is a kind of flexible sheet waterproof material,
which uses amorphous polypropylene (APP) modified asphalt as a dipping and
covering modifier, whose upper surface is coated by PE film, fine sand, mineralgrain
or aluminum foil or other isolating materials.
The compound is a mixture of distilled bitumen, plastomers and elastomers
which gives the membrane excellent resistance to heat aging and weathering.
Features
- Integrated advantage properties of spunbonded polyester substrates
and APP modified asphalt, wonderful integrated properties.
- High strength and good property to stand against water pressure
- High tensile strength and elongation rate, strong adaptability for substrate
shrinking distortion and cracks
- Good construction performance, with firm and enduring joints
Applied Range
- All kinds of building roof engineering projects, treading, non-treading, heat preservation,
planting building surfaces, roof parking lots, and converted buildin surfaces
- All kinds of underground waterproof or dampproof engineering projects
- Bridge surfaces of subways, tunnels, or concrete roads, sewage treatment and
garbage burying projects and other municipal engineering waterproof projects
- Water spraying pools, swimming pools, penstocks, water pools, and so on.
Uses
1) Make sure the roof deck smooth, clean and dry(Moisture<9%),then apply the surface
of roof deck homogeneously with a kind bitumen paint till dry to start application.
2) There are two methods in application:
One way is by heating and melting method---
Heat the polyethylene film of the membrane and roof deck surface by heating
and melting method to be nearly melted(not flowing), then install the membrane
fully bonded to the roof deck with overlaps of 5-10cm.
The other way is by cold adhesive method---Pour the cold adhesive homogeneously on the roof deck then roll the membrane to install
it to be fully sticked to roof deck. By heating and melting method and by cold adhesive
can be used in alternation in application as requested.
3) After application, a full serious inspection is required to make sure no air bubble,
no fold, no falling away etc to guarantee the waterproof life.
Send Inquiry to This Supplier
You May Also Like
-
High Adhesive, Water-proof, Anti Corrosion, Weather-resistant Asphalt Adhesive Glue Patch Cover for ConstructionNegotiableMOQ: 100 Rolls
-
GeomembraneNegotiableMOQ: 2700 Rolls
-
1.5mm Thick UV-resistant Geomembrane High Strength Waterproof Membrane for Dam and Canal Lining BOLIUS$ 0.15 - 0.20MOQ: 10 Square Meters
-
Non-curable Rubber Paint Rubber Asphalt Waterproof Coating Made in ChinaUS$ 1.5 - 6MOQ: 500 Kilograms
-
Low Cost Waterproof Material ManufactureUS$ 1,000 - 50,000MOQ: 1 Set
-
PTFE Architectural Membrane MaterialNegotiableMOQ: 1
-
Special Compound BaseUS$ 0.12 - 0.25MOQ: 7000 Square Meters
-
PolyLock/HDPE Lock/ E Lock/ HDPE E Lock/Geomembrane Attaches HDPE GeomembranesUS$ 10 - 50MOQ: 1 Piece
-
Breathable House Wrap Membrane Roofing Waterproofing MembraneUS$ 0.42 - 0.42MOQ: 5000 Square Meters
-
<MIicroVENT> Waterproof Vent MembraneUS$ 0.1 - 3MOQ: 10000 Pieces
