Bent showerroom glass , Tempered glass

Jingfeng Glass---Ideas for life

Jingfeng glass designer would assist the owner and designer to realize their ideal function, art and effect of glass, also help to control the cost.

Products cover: Ceramic Digital Printing Glass, Color glazed Glass , SGP Laminated Glass, Tempered Glass, Hollow Glass, Laminated Glass, Anti-Fire Glass, Hot Bending Glass, Hospital glass, Special-shaped + Technology, Interior Decorative Glass, Intelligent Dimming Glass, LED + Ceramic digital Printing Glass.

Product Introduction

Tempered glass is a kind of safety glass, which made from ordinary annealed glass in required dimensions is treated by heat around 700℃ (softening point) right before rapid uniform cooling process. For glass after toughening treatment, uniform compressive stress forms on its surface and tensile stress forms inside the glass, which increase the ability to resist the bending and impact. Its strength is over 4 times than ordinary annealed glass. Tempered glass bear no damage or further processes such as cutting and grinding, for those will destroy the balance of uniform compressive stress on glass surface and will break the glass into granules.

1. Tempered glass: surface stress of tempered glass used for curtain wall: a≥95Mpa;

GB15763.2 Safety Glazing Materials in Building: Tempered Glass (Chinese Standard)

2. Heat-strengthened glass: surface stress of heat-strengthened glass used for curtain wall: 24Mpa≤a≤69Mpa

GB17841 Heat-strengthened Glass (Chinese Standard)

Bent Tempered Glass

Bent tempered glass is made from plate glass through treatments in which the glass was heated to its softening point right before being shaped in bending die, and then uniformly cooled.

Application of Tempered Glass

Flat tempered glass andbent tempered glass are both safety glasses, which are applied, in combination with other processes, in high-rise building doors and windows, curtain wall, indoor partition, shower room, day-lighting roof, sightseeing elevator access, furniture, railings, etc.

Processing Center:

Italian INTERMAC Glass Processing Center can achieve the polishing and fine grinding of inner and outer curves, straight edges, multi-pole edges, and inner hole of the special-shaped glass, also realize such techniques as glass engraver, deep glass engraver and lettering at the side edge of glass.