Contact Platform Support
Help CenterGypsum Joint Compound
Related Products
-
Paper Faced Moistureproof Gypsum BoardUS$ 0.7 - 1.35MOQ: 4000 Square Meters -
Black High Quality Best Price Drywall ScrewUS$ 1,000 - 1,000MOQ: 1 Ton
-
Paper Faced Gypsum BoardNegotiableMOQ: 4000 Square Meters
-
Paper Faced Gypsum BoardUS$ 0.7 - 1.35MOQ: 4000 Square Meters
-
Gypsum BoardUS$ 0.7 - 1.35MOQ: 4000 Square Meters
Weight:25 kg /pail
Used for plaster wallboard finishing and texturing. Do not mix with other material.
If the joint compound is dry,carefully add water to read the desired consistency.The best way is 1kg jointing compound with 550ml water.
1 Apply the compound into any gap between the boards and fill the taper.Cut a piece of tape and press into the ver the tape with the compound,and remove the redundtant,make sure the joint keep the same level with the surface,the first joint’s width is 100-120mm.
2 After the first coat is set and and dried apply a further coat,extending 50mm to 60mm on each side.Ensure that the coat is tight and featured into the board surface.
3 Once the second coat is set and dried apply a final coat extending 50mm to 60mm on each side ,ensure that it is tight and featured into the board surface.
4 After the final coat is set and dried ,the joint should be lightly sanded using 120 grit paper held in hand or pole sander.
APPLICATION:
The compound should not be used in temperatures above 45℃ or below 0℃.It must be applied over every wallboard joint.To ensure an adequate adhesion of the compound the tape must be firmly pressed against the board using a hammer head joint knife,uniformly distributing the compound.Likewise,apply multi-used compound over screw heads and plastic or metallic corners.To obtain better results,apply two or three compound layer over the tape.Clean excess compound off the board before it dries.Make sure that dry compound does not come into contact with the remaining mixture.
Send Inquiry to This Supplier
You May Also Like
-
Steel Frame House StructureUS$ 10 - 120MOQ: 1 Set
-
Quick Assembled Convenient Thermal Insulation Prefab House L5.95*W3*H2.8m With Customized Inner DecorationUS$ 900 - 1200MOQ: 18 Sets
-
Prefabricated HotelNegotiableMOQ: 2300 Sets
-
Moving ToiletNegotiableMOQ: 1
-
Ware House in ChinaUS$ 1 - 9,999,999MOQ: 1 Cubic Centimeter
-
Hi-tech Prefabbricate Houses Low CostUS$ 1,000 - 50,000MOQ: 1 Set
-
16M2 New Design Prefabricated House Portable House CabinUS$ 2,500 - 4,500MOQ: 2 Sets
-
FRP Pultrusion ChannelNegotiableMOQ: 3000 Meters
-
Magic Home PorterNegotiableMOQ: 1
-
Steel Structure Metal ShedsUS$ 1,300 - 1,400MOQ: 22 Tons
