Contact Platform Support
Help CenterDisperse Thickener Chemical Auxiliary Agent EM-628 for Textile Dye Printing (YIMEI Decades of Experience)
Related Products
-
Textile Binder EM-25 for Pigment Printing(YIMEI )NegotiableMOQ: 1 Ton -
Acrylic Sofer Binder in Chemicals EM-35 for Printing(YIMEI Decades of Manufacturing Experience)NegotiableMOQ: 1 Ton
-
Super Soft Binder Emulsion DT-893A for Pigment Printing,cotton,blending(YIMEI Decades of Manufacturing Experience)NegotiableMOQ: 1 Ton
-
Pigment Thickener EM-618 for Textile Printing(YIMEI )NegotiableMOQ: 50 Kilograms
-
Water Pigment Paste for Textile Pigment Printing (YIMEI )NegotiableMOQ: 1 Ton
Specifications
1) Reverse polymerization2)No blockage, high color yield
3)manufactory wholesale
Dispersion Printing Thickener(EM-628)
1)General Description
EM-628 printing thickener is a kind of acrylic polymer in viscous liquid, serving as printing carrier in dispersion printing on textiles. Usually, EM-628 can take the place of other kinds of dispersion thickener, like sodium alginate.
2) Technique Data
Appearance Solid content Viscosity PH value(25°C)
yellowish viscous emulsion 36±2% 100.000-150.000 mpas 6~7
3) Property and features
1. Viscous liquid, easy to take out or mix with other auxiliaries.
2. Printing paste is easy to make, it can be ready in a while after high-speed stirring.
3. Post-thickening function allows extra dosage even in case the printing paste is not viscous enough. Add some EM618 when stirring to adjust the consistency of printing paste.
4. The performance of prepared printing paste is very stable, there is no problem to use the rest of paste next time.
5. Printing paste complemented by EM-628 has good color yield, sharp definition. Even under special situation, the paste won’t spray out.
6. Economical to use. Compared to sodium alginate, EM-628 is much more cheaper,which largely reduces processing cost.
7. To enhance color depth in loop ager for disperse prints. soft hand feeling.
4) Usage
1. Measure certain dosage of EM-628 thickener, add specified dosage of water, and stir the mixture with high-speed emulsion centrifuge. Paste will be shaped in a few minutes.
2. Mix dyestuff and water together. Add EM-618 thickener, while mixture is stirred with high-speed emulsion centrifuge, until it reaches required consistency.
3.Dispersed dyestuff paste formula for reference
Dispersed dyestuff Water EM-628 Total
1-10% 85-90% X% 100%
5) Working procedure of printing
Printing→Drying→Vaporing→Postprocessing→Finished products
Send Inquiry to This Supplier
You May Also Like
-
High Efficiency Mould Release Agent Silicone Type for Rubber & Composite PartsUS$ 2 - 5MOQ: 1000 Kilograms
-
Cyanuric Acid 25kgNegotiableMOQ: 1 Ton
-
Zeolite Carbon Sieves 3a 4a 13x Adsorbent for Oxygen Concentrator Generator Molecular SieveNegotiableMOQ: 1
-
Modified Starch for Paper IndustrialUS$ 630 - 650MOQ: 5 Tons
-
NA Cmc Powder Food GradeUS$ 550 - 3,690MOQ: 5 Tons
-
Diapers Baler Hydraulic Pressing Baling MachineUS$ 3,200 - 3,250MOQ: 1 Set
-
Leather Wall Panel for Background and Ceiling PanelUS$ 3 - 6MOQ: 200 Pieces
-
AC Blowing Foam Blowing Agents of AzodicarbonamideUS$ 2,100 - 2,680MOQ: 1 Ton
-
High Quality Anionic Polyacrylamide Water Treatment Chemicals Polymer /PAM for Waste Water/Oil Drilling/MiningUS$ 1,000 - 2,600MOQ: 1 Metric Ton
-
10-0132 T/r/l Suiting FabricUS$ 2 - 3MOQ: 3000 Meters
