Contact Platform Support
Help CenterDisperse Thickener EM-628 for Terylene Nylon Dyestuff Printing (YIMEI Decades of Experience)
Related Products
-
Reactive Thickener Chemical for Textile Printing(YIMEI )NegotiableMOQ: 1000 Kilograms -
Acrylic Disperse Dyes Thickener Use in Pigment Printing and Dye Printing(YIMEI)NegotiableMOQ: 2 Tons
-
Pigment Printing Acrylic Thickener in Dye Printing(YIMEI)NegotiableMOQ: 2 Tons
-
(YIMEI) Acrylic Polymer Thickener for Textile Printing Mix Binder,soft Agent,pigment PasteNegotiableMOQ: 1 Ton
-
Reactive Thickener for Textile Dyes Printing Mix With Soft Agent,binderUS$ 1 - 4.5MOQ: 1 Ton
Specifications
1) Reverse polymerization2)No blockage, high color yield
3)manufactory wholesale
Dispersion Printing Thickener(EM-628)
2. Thickener for Textile Dye printing
EM-628 |
1)Appearance yellowish viscous liquid 2)Solid content 36±2% 3)Dosage: 3% 4)PH value 6~7 5)Viscosity:100.000-150.000 mpas
|
Thickener for Dispersion Printing 1)Printing paste complemented by EM-628 has good color yield, sharp definition.Even under special situation,the paste won’t spray out. 2)Economical to use.Compared to sodium alginate,EM-628 is much cheaper,and reduce cost. 3).To enhance color depth in loop ager for disperse prints,soft hand feeling.
|
EM-610 |
1)Appearance yellowish viscous liquid 2)Solid content 36±2% 3)Dosage: 3% 4)pH value 7±0.5
|
Thickener for Reactive Printing 1)Strong water cohesive and thickening ability. 2)High concentration, good color yield. 3)Sharp printing definition, no influence to screen handle 4) Suitable for flat screen printing or rotary screen printing.
|
1)General Description
EM-628 printing thickener is a kind of acrylic polymer in viscous liquid, serving as printing carrier in dispersion printing on textiles. Usually, EM-628 can take the place of other kinds of dispersion thickener, like sodium alginate.
2) Technique Data
Appearance Solid content Viscosity PH value(25°C)
yellowish viscous emulsion 36±2% 100.000-150.000 mpas 6~7
Thickening capability
a. Mix with water 3% dosage of EM-628,rotary viscosity will be lower than 22pa.s.
b. Mix with 0.4M(About 3.36% dosage)NaHCO3 aqueous solution: 6% dosage of EM-628, rotary viscosity will be higher than 5pa.s.
3) Property and features
1. Viscous liquid, easy to take out or mix with other auxiliaries.
2. Printing paste is easy to make, it can be ready in a while after high-speed stirring.
3. Post-thickening function allows extra dosage even in case the printing paste is not viscous enough. Add some EM618 when stirring to adjust the consistency of printing paste.
4. The performance of prepared printing paste is very stable, there is no problem to use the rest of paste next time.
5. Printing paste complemented by EM-628 has good color yield, sharp definition. Even under special situation, the paste won’t spray out.
6. Economical to use. Compared to sodium alginate, EM-628 is much more cheaper,which largely reduces processing cost.
7. To enhance color depth in loop ager for disperse prints. soft hand feeling.
4) Usage
1. Measure certain dosage of EM-628 thickener, add specified dosage of water, and stir the mixture with high-speed emulsion centrifuge. Paste will be shaped in a few minutes.
2. Mix dyestuff and water together. Add EM-618 thickener, while mixture is stirred with high-speed emulsion centrifuge, until it reaches required consistency.
3.Dispersed dyestuff paste formula for reference
Dispersed dyestuff Water EM-628 Total
1-10% 85-90% X% 100%
5) Working procedure of printing
Printing→Drying→Vaporing→Postprocessing→Finished products
Notes: Above usages have been proved through practice. But considering practical printing techniques, please choose the right manufacturing process after experiment.
Send Inquiry to This Supplier
You May Also Like
-
High Efficiency Mould Release Agent Silicone Type for Rubber & Composite PartsUS$ 2 - 5MOQ: 1000 Kilograms
-
Cyanuric Acid 25kgNegotiableMOQ: 1 Ton
-
Zeolite Carbon Sieves 3a 4a 13x Adsorbent for Oxygen Concentrator Generator Molecular SieveNegotiableMOQ: 1
-
Modified Starch for Paper IndustrialUS$ 630 - 650MOQ: 5 Tons
-
NA Cmc Powder Food GradeUS$ 550 - 3,690MOQ: 5 Tons
-
Diapers Baler Hydraulic Pressing Baling MachineUS$ 3,200 - 3,250MOQ: 1 Set
-
Leather Wall Panel for Background and Ceiling PanelUS$ 3 - 6MOQ: 200 Pieces
-
AC Blowing Foam Blowing Agents of AzodicarbonamideUS$ 2,100 - 2,680MOQ: 1 Ton
-
High Quality Anionic Polyacrylamide Water Treatment Chemicals Polymer /PAM for Waste Water/Oil Drilling/MiningUS$ 1,000 - 2,600MOQ: 1 Metric Ton
-
10-0132 T/r/l Suiting FabricUS$ 2 - 3MOQ: 3000 Meters
