4mm Stainless Steel Sheet Strapping 304 409 410s With Standars Sizes

4mm stainless steel sheet strapping 304 409 410s with standars sizes

Application--medical grade stainless steel 316 316l

1.Automotive:Automotive trim and molding/Difficult-to-form exhaust-          system components, tubular manifolds, mufflers/Exhaust manifold and other exhaust-              system components, catalytic converter shells, clamps

2. Construction: Gutters and downspouts, roofing, siding

3. Kitchenware: Cooking utensils, dishwashers, ovens, range hoods, refrigerators, skewers

4. Chemical processing: Oil refinery equipment, oil burner and heater parts

5. Appliances: Hot water tanks, residential furnaces

6. Power generation: Heat Exchanger tubing

7. Farming: Dry fertilizer spreaders/Farm animal pens

Stainless steel maintenance:

(1) Regular cleaning and maintenance

(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches

(3) Use soap, weak detergent or warm water to remove surface dust, dirt

(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)

(5) Use neutral detergent or ammonia solution in addition to surface oil

(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by dirt.

1. Carbon/Low Alloy High Strength/ Alooy Structure/ Boiler and Pressure Vessel steel plates

2 cold rolled steel plates

3 galvanized steel plate

Al-zinc Coils and Plates

4.stainless steel plates

1. steel coil to steel plate

2.Flame cutting

3.Laser cutting 

4mm stainless steel sheet strapping 304 409 410s with standars sizes

1. How long can make delivery?
For stock products, will make shipments in 5- 7 days after receiving deposit or receiving L/C; for products need new production for common materials, usually make shipments in 15-20 days; for products need new production for special and rare materials, usually need 30-40 days to make shipment.
2. Will the Test Certificate be certified to EN10204 3.1?
For the new production products no need furthur cutting or processing, will provide the Original Mill Test Certificate certified to EN10204 3.1; for the stock products and the products need cutting or furthur processing, will issue Certificate of Quality on our Company, It will show the original mill name and the original datas.
3. Once the received products found not comply with the products the contract demands, what will you do?
Once the received products found not comply with the products the contract lists, when receiving the pictures and the official documents and data from your side, if it is proved not comply, we will compensate the loss at first time.

4mm stainless steel sheet strapping 304 409 410s with standars sizes

Tianjin Emerson Commercial and Trade Co.,Ltd mainly provides steel plate, steel sheet, steel pipe,seamless steel pipe and tube, round bars and steel section, and doing steel products processing service: steel plate and sheet processing service. The processing works concludes cutting the larger plate into the small sizes customer demand, cut by drawing, cut to special sizes, weld the cut parts by drawing, also make galvanizing processing or surface painting on the final processed parts; steel pipe hollow bar cutting and lathe processing to make the outer diameter and wall thickness to meet customers requirement, also make heat treatment for hollow bars and pipes. Tianjin Emerson Commercial and Trade Co.,Ltd has large stocks for the carbon steel and low alloy steel plates and sheets, especially have the thick plate and heavy plates on stock, also can provide the special material and large size steel plates, boiler and pressure vessel steel plate, marine steel plate, hot rolled steel plate for new production.

Steel plate: hot rolled steel plate; cold rolled steel plate;galvanized steel plate; al-zinc steel coil plate; stainless steel plate
Steel pipe: seamless pipe; galvanized round pipe; stainless steel pipe
Round bar
Steel profile: angle bar; channel bar; h beam; rectangular tubes