Calcium Silicate Block

Specifications

calcium silicate block
1.Density:220Kg/M3
2.Service Temp:1000 C
3.Size:1000*500, 600*300, 900*600,1200*600
4.ISO9001:2008

calcium silicate block 

 

Company website:  http://mingguang.en.china.cn  

 

Product characteristics:

²        Good durability, can bear high temperature  within the limit of continuous heat load,

²        Low thermal conductivity, in the whole range are used with unmatched adiabatic performance.

²        Light weight, high strength. It is the highest in these hard thermal insulation products.

²        Better durability, use for a long time without powder.

²        Construction with ordinary carpenter applicability, tools can be optional cut products.

²        Used safety, hygiene. Excluding asbestos, sulfur, chlorine such poisonous substances.

²        Fear water, but after drying also can be used.

 HCS Physical Performance Index

Items	Unit	HCS-170	HCS-220	HCS-270
Bulk Density	Kg/m3	170(±10%)	220(±10%)	270(±10%)
Pressure Strength	MPa	≥0.40	≥0.50	≥0.60
Flexural Strength	MPa	≥0.30	≥0.35	≥0.40
Thermal Conductive	W/m.k	≤0.048 +0.00011t	≤0.050 +0.00011t	≤0.056 +0.00011t
Temp. limit	degrees	1000	1050	1050
Linear Shrinkage	%	≤1.50 (1000,3hrs)	≤1.50 (1000,3hrs)	≤1.50 (1000,3hrs)

 

Block Sizes and Dimensional Tolerances

Length(±3mm)	Width(±3mm)	Thickness(+2mm,—1.5mm)
610	303,300,150	25—140
600	300	25—140
400	250	25—140
1000	500	25—140
1200	600	25—140

We also supply special size and type.