medical SY-B Shape-damaging Machine

Specifications

Shape-damaging Machine
Model : SY-B
Damaging Ability: 100kg/h-200kg/h
Motor Power: 2200w
Outer Size: 850x390x840mm

SY shape-damaging machine series for the throwaway medical plastic implements, are mainly used to damage the medical plastic implements such as the throwaway injectors and the throwaway droppers. The scraps after damage are like strip or block shaped and easily to be stored, transported,reprocessed and disposed. At present, the machine is widely used in the medical units of all levels.

Damageing Ability: 100kg/h-200kg/h

Damaging scope: The throwaway injectors and the throwaway droppers.

Motor Power: 2200w

Power Supply: 380V  50Hz

Outer Size: 850x390x8400mm

Net weight: 220kg

Remark: The product can be constantly improved according to the opinions from the customers. The above parameters are only for the reference.

Before pressing down the operating button, do not put the plastic implements to be damaged into the machine.

Before opening the front door of the machine, put down the baffle of the discharge door first( To the models of SY-A and SY-B)

Press down the operating button, the motor drive the knife to do an idle running for 1-2 minutes, if there is no cacophony, then begin to put the plastic implements from the feed entrance into the machine to damage them.

The plastic implements for damage in the feed entrance should be appropriate, not to be excessice for fear to burn the motor.

When operating, the operator should wear the protective mask and use the soft object such as stick to assist putting the materies into the feed entrance, for fear to hurt his face.

Strictly prohibit the operator facing to the feed entrance and putting his hands into it to prevent the accident.